|

(0)

|

|

|

|

Racing » Products » ECU interfaces » CAN interface

ECU interface - CAN

What is the CAN ECU interface?

The Race Technology ECU interface is a small in-line module for use with a DASH1 or DASH2 display, a DL1 or DL2 data logger or any combination of data logger plus display, to allow data from your engine management system to be displayed and recorded. The CAN interface is compatible with vehicle ECUs using the Bosch Controller Area Network (CAN) communications system, otherwise you will need the Serial Interface.

Who is the CAN ECU interface designed for?

The ECU interface is designed for anyone wishing to read vehicle or drive train sensor data directly from their ECU, without the need for additional sensors, and whose ECU communicates via CAN. Common parameters such as engine speed, coolant temperature, throttle position, etc, are normally available from the ECU, so no additional sensors would be required if using the ECU interface. This leaves the analogue input channels on your data logger free for connection to more specialised sensors, not normally monitored by your ECU (eg: suspension travel). ECUs are being added to the compatibility list all the time.

ECU Compatibility: 

Please contact Race Technology to confirm compatibility with your ECU. Please note that the base CAN ECU interface is not configured for any ECU, it needs to be configured.  If you do not have ECU or manufacturer-specific CAN parameter information, do not purchase the base version.  See "Variations" for pre-programmed adapters. If you have a vehicle with CAN-enabled OBD2 you may wish to consider the CAN OBD2 adapter.

Key Features

• Compatible with Race Technology displays and data loggers as stand alone units, or as part or a data logger and display system
• Receive data from existing vehicle sensors via your ECU - no need to add additional sensors for data logging. All channels from ECU are in addition to the channels already provided with the Race Technology data logger/display
• CAN interface fully user configurable with software supplied. Programmable for virtually any vehicle or ECU using standard CAN protocols. Select which channels to receive and decode.
• Upgradeable firmware.
• Robust CNC machined aluminium enclosure (3.5 cm x 2.5 cm x 1 cm) with potted electronics
• Supplied with cables, instruction manual and comprehensive software CD