 |
Call me back |
 My basket (No items) |
Checkout |
Add to email list
|
|
(0) |
|
|
Racing » Products » Sensors » Position sensors » Wheel speed
Wheel Speed Sensor
Description
The "hall effect" wheel speed sensor is highly robust and designed specifically for high reliability automotive applications. It does not require a magnet to trigger it, just a moving metal "target", for example a bolt on the back of the brake disk. For direct connection to the DL1 a "pull up resistor" is required. If the sensor is ordered with a cable, this resistor is already included and will be ready for immediate use with the DL1.
For further information on the wheel speed sensor please visit our Knowledge Base here
Features
- Better signal to noise ratio than variable reluctance sensors.
- Sensor electronically self adjusts to slight variations in runout and variations in temperature.
- Fast operating speed – over 100 kHz
- EMI resistant
- Wide continuous operating temperature range.
Technical Data
| Supply voltage | 4.5 to 24 VDC |
| Supply current | 10mA typ., 20 mA max. |
| Output voltage (output low) | 0.4 V max. |
| Output voltage (output high) | 10 μA max. leakage into sensor |
| Switching time – Rise (10 to 90%) | 15 μsec. Max. |
| Switching time – Fall (90 to 10%) | 1.0 μsec. Max. |
| Absolute Max. Supply voltage (Vs) | ±30 VDC continuous |
| Absolute Max. Output current | 40 mA sinking |
| Absolute Max. Temperature range | -40 to 150°C (-40 to 302°F) |
Add to basket (GBP 30.00)
Available Add-ons
Note: all prices are exclusive of VAT at 17.5%
Phone: +44 (0) 1773 537620
Fax: +44 (0) 1773 537621
Email: sales@race-technology.com