|

(0)

|

|

|

|

Racing » Products » Display products » DASH3

DASH3 and DASH3lite Display unit

The DASH3 is a data and lap time display that is designed to work with Race Technology's range of data logging products. It is the smallest display in our range and can be used to provide either supplementary information alongside other instruments, or as the primary source of information in some race applications.

Physically, the DASH3 is housed in a small injection moulded case and is controlled by a sealed membrane keypad. The display is a custom made graphics panel which has been designed to be clear and readable from almost any angle and under any lighting conditions.

The DASH3 comes in 2 versions, the DASH3 and the DASH3lite:

• The DASH3lite is designed primarily as a lap time display, but also displays speed, RPM and has the configurable shift lights.
• The standard DASH3 has all the features of the DASH3lite, but in addition can be configured to display almost any combination of numerical displays, graphs and bar charts of any variable and also display warning etc. This makes it a very flexible solution to all of your data displaying needs.

Order DASH3lite using link immediately below, or DASH3 Full Version under Variations.

Note 1:  If DASH3 or DASH3lite is to be used with an early (MK1) DL1 we recommend use of the 1m serial extension cable with external power input, available below.  This allows a separate 12V feed to the DASH3, bypassing the DL1.  Early DL1s sometimes have inadequate power capacity to feed the DASH3, resulting in DL1 or DASH3 shutting off.

Note 2:  If DASH3 or DASH3lite is to be used with an ECU, OBD2 or CAN adapter and no Race Technology data logger you will need the 1m serial extension cable with external power input, available below.  This allows a separate 12V feed to the DASH3 when it is being configured from the PC. 

Also available in a specially priced system package with the best-selling DL1 GPS Data Logger, see "System Deals".