|

(0)

|

|

|

|

Racing » Products » Data loggers » DL1 Classic (MK2) » FAQ

DL1 Classic Frequently Asked Questions

What is the difference between the DL1 and the DL90 data logger?

The DL1 is based around some of the same technologies as the DL90 and they share the same physical dimensions - but that is where the similarities end. All the components inside the DL1 are new and there is no way to physically upgrade a DL90 to a DL1.

What is the maximum g-force/speed that can be measured?

The standard DL1 is configured for a maximum of 2g acceleration.  An optional 6g accelerometer range is also available. The maximum measurable speed is about 1000mph.

How often do you get GPS speed updates?

The GPS system calculates speed every 200ms (5 Hz), however this data is combined with the data from the accelerometers to calculate speed 100 times every second with very high accuracy.

How often do you get GPS position updates?

The GPS system calculates position every 200ms (5 Hz), however this data is combined with the data from the accelerometers to calculate position 100 times every second with very high accuracy.

How accurately is speed measured?

With average GPS reception, speed accuracy is about 0.1mph (or 0.1% if greater) when you are just driving along at fairly constant speed, and about 0.2mph (or 0.1% if greater) during fast accelerations or braking. The only exception is at very low speeds (under 10mph) where the error increases to about 1mph. Do not be fooled by exaggerated claims from other manufacturers… this is as good as it gets! In contrast, a standard wheel speed pickup is only accurate to about 4% at constant speeds, and under high accelerations or braking, the error increases up to about 20%.

How accurately is position measured?

With good GPS reception, positional accuracy is about 3m (CEP).

What happens to the data if you drive under a bridge/tunnel/trees etc?

Because speed and position are calculated from both the GPS data and accelerometers, even if the GPS data "disappears" for a number of seconds, you won't be able to tell from the data in the software. Only if GPS data disappears for an extended time (20+ seconds) will the data start to degrade noticeably.

Where can I buy it?

Contact sales@race-technology.com to find your nearest stockist or use our secure online shopping facility

Is it upgradeable?

Yes, the DL1 can be upgraded to a 20Hz GPS at any time. Trade in service is also available if you wish to upgrade to a gyro or upgrade the accelerometers. The trade in price will depend on your units age and condition. Contact sales@race-technology.com for further information.

How much data can you log to a Compact flash card?

The DL1 logs about 27MB of data per hour, so for a 64MB card you could get up to about 2.4 hours of data, for a 2GB card you could get about 3 days!

Will it work with any Compact Flash card?

Whilst we cannot guarantee that the DL1 works with all compact flash cards, we have successfully tested many makes and sizes of compact flash card, we haven't yet found one it won't work with.

Is it easy to use?

The DL1 has one button to start and stop logging, how much simpler could we have made it? We have kept the software as simple as possible whilst making it as flexible as we can to ensure that you can do what you need to with it. As with all computer programs, the first time you use it there is a lot to take in - after you've become familiar with it, you will be able to analyse data quickly and efficiently.

I have more than one car that I want to use the DL1 in, is there an easy way to accommodate this?

Spare connectors for the DL1 data logger are available to purchase separately.  These are particularly useful if one unit is to be used in multiple vehicles - then it is easy to transfer the logger or performance meter without having to also disturb all of the electrical installation.

What specification of computer is required?

As with most programs, the analysis software will run on just about any PC with windows 95 or later - however, the faster the PC, the faster the program will run. The main restriction is the memory required for long runs; typically we recommend that your PC has an absolute minimum of about 30MB of memory installed for each hour of data loaded. The PC also requires some means of downloading the data from the compact flash cards, there are many options available - normally a USB reader is most convenient.

Is the DL1 reliable and well made?

The DL1 is absolutely class leading in terms or component quality, build quality and reliability - this is a very high quality professional instrument, entirely designed in-house and manufactured in the UK. The unit carries the normal 12 month guarantee against manufacturing defects and lifetime email support.