|

(0)

|

|

|

|

Racing » Products » Display products » DASH1 » FAQ

DASH1 Frequently Asked Questions

Because the DASH1 uses the GPS data from the DL2/DL1/AX22 the system knows its position on the track. To mark the point as a lap or sector marker you simply press a button on the DL2/DL1/AX22. The DL2/DL1/AX22 then calculates the lap and sector times every time you subsequently pass that point on the track and transmits them to the dashboard for display.

If the GPS data is 5Hz, does this mean the times have a resolution of 0.2 seconds?

No, the system calculates the position very accurately and the lap times have a resolution of 0.01 seconds. Sector and lap times are generally far more accurate than a traditional lap beacon system.

Can I directly compare the lap sector times from the display and the analysis software?

Yes, the track markers can be imported and exported from the analysis software.

Does the dashboard work with the DL90 data logger?

No, there is no serial output from the DL90 for the DASH1 to use

No, the DASH1 is designed to read a serial stream from a Race Technology data logger or performance meter and doesn’t have any other inputs.