|

(0)

|

|

|

|

Racing » Products » Display products » DASH1 » FAQ

DASH1 Frequently Asked Questions

• How does the lap and sector timing work without a beacon?

Because the DASH1 uses the GPS data from the DL2/DL1/AX22 the system knows its position on the track. To mark the point as a lap or sector marker you simply press a button on the DL2/DL1/AX22. The DL2/DL1/AX22 then calculates the lap and sector times every time you subsequently pass that point on the track and transmits them to the dashboard for display.

• If the GPS data is 5Hz, does this mean the times have a resolution of 0.2 seconds?

No, the system calculates the position very accurately and the lap times have a resolution of 0.01 seconds. Sector and lap times are generally far more accurate than a traditional lap beacon system.

• Can I directly compare the lap sector times from the display and the analysis software?

Yes, the track markers can be imported and exported from the analysis software.

• Does the dashboard work with the DL90 data logger?

No, there is no serial output from the DL90 for the DASH1 to use

• Can the DASH1 be used on its own?

No, the DASH1 is designed to read a serial stream from a Race Technology data logger or performance meter and doesn’t have any other inputs.