Search found 326 matches
- Fri Jun 30, 2023 2:20 pm
- Forum: Sensor-related questions
- Topic: Dash2 CAN feed from ECU sent in C but displayed in F
- Replies: 8
- Views: 50744
Re: Dash2 CAN feed from ECU sent in C but displayed in F
Apologies, I understand now. The issue isn't with the display on the DASH2, the problem is in the configuration file for the CAN interface. It should be configured to convert the values from the ECU to degrees C before they are transmitted. If you email mhill at race-technology.com I can send you an...
- Thu Jun 22, 2023 12:27 pm
- Forum: Sensor-related questions
- Topic: Dash2 CAN feed from ECU sent in C but displayed in F
- Replies: 8
- Views: 50744
Re: Dash2 CAN feed from ECU sent in C but displayed in F
When the data is handled internally it is always in Degrees C. The choice of units for displaying each parameter are selected in the LCD Data area. For each temperature variable displayed you can then select if you want to show it in Degrees C, Degrees F, or K.
- Tue Jun 21, 2022 10:34 am
- Forum: General support questions
- Topic: DL1 mk1 firmware
- Replies: 3
- Views: 29481
Re: DL1 mk1 firmware
Email support@race-technology.com and I will send you the DL1 MK1 reflash file.
Please note that the DL1 MK1 has been out of production for 16 years and is no longer supported.
Please note that the DL1 MK1 has been out of production for 16 years and is no longer supported.
- Mon Jun 20, 2022 12:35 pm
- Forum: General support questions
- Topic: How to override the detected circuit?
- Replies: 2
- Views: 25842
Re: How to override the detected circuit?
Hello,
Please would you email us with the run file in question and we will investigate.
service@race-technology.com
Please would you email us with the run file in question and we will investigate.
service@race-technology.com
- Thu Jun 09, 2022 11:16 am
- Forum: General support questions
- Topic: DL1 Pro not logging at 1Khz only at 100Hz
- Replies: 1
- Views: 23468
Re: DL1 Pro not logging at 1Khz only at 100Hz
Hi Jeff,
There are multiple places where the sampling rate and logging rate can be configured. Please send your DL1 config to service@race-technology.com and I'll look into it.
Lorne
There are multiple places where the sampling rate and logging rate can be configured. Please send your DL1 config to service@race-technology.com and I'll look into it.
Lorne
- Tue May 10, 2022 9:29 am
- Forum: Installation questions
- Topic: DASH2 Pro Hardware Buttons
- Replies: 2
- Views: 28422
Re: DASH2 Pro Hardware Buttons
Correct. "Set" and "select" are used interchangeably.
- Mon Apr 25, 2022 8:10 am
- Forum: General support questions
- Topic: Updating D2 through DL1 issues
- Replies: 2
- Views: 24755
Re: Updating D2 through DL1 issues
Hello Chris,
Is the ECU adapter in the loop when you attempt this operation? It should not be. D2 update via DL1 is possible only when the two devices are connected directly.
Is the ECU adapter in the loop when you attempt this operation? It should not be. D2 update via DL1 is possible only when the two devices are connected directly.
- Tue Apr 12, 2022 3:03 pm
- Forum: General software support
- Topic: Analogue buttons as additional inputs
- Replies: 1
- Views: 10178
Re: Analogue buttons as additional inputs
Hello Adrian,
Do you have the "advanced options" licence on your DASH2 PRO? What is the serial number of your dash?
You can email me directly if you wish and I'll help you resolve.
lorne@race-technology.com
Do you have the "advanced options" licence on your DASH2 PRO? What is the serial number of your dash?
You can email me directly if you wish and I'll help you resolve.
lorne@race-technology.com
- Thu Mar 31, 2022 11:54 am
- Forum: Sensor-related questions
- Topic: oil pressure incorrect reading please help
- Replies: 11
- Views: 66989
Re: oil pressure incorrect reading please help
The equation you have selected is for the Race Technology supplied pressure sensor. You are using a different pressure sensor and this has different characteristics when compared with the Race Technology supplied pressure sensor.
- Wed Mar 30, 2022 10:23 am
- Forum: Sensor-related questions
- Topic: oil pressure incorrect reading please help
- Replies: 11
- Views: 66989
Re: oil pressure incorrect reading please help
What equation are you using for this sensor in the dash config?
What is the sensor output in volts at ambient pressure and full scale?
What is the sensor output in volts at ambient pressure and full scale?
- Wed Mar 30, 2022 8:07 am
- Forum: Sensor-related questions
- Topic: oil pressure incorrect reading please help
- Replies: 11
- Views: 66989
Re: oil pressure incorrect reading please help
What is the make and model of sensor?
- Mon Feb 14, 2022 10:52 am
- Forum: General software support
- Topic: Backup current settings from Dash Pro 2
- Replies: 2
- Views: 13183
Re: Backup current settings from Dash Pro 2
The options below just load in the PC software. They do not communicate with the dash so you can select any one.
When you have opened the software you need to click "read configuration". This will load the current settings from the dash which you can then save as your backup copy.
When you have opened the software you need to click "read configuration". This will load the current settings from the dash which you can then save as your backup copy.
- Mon Oct 18, 2021 11:15 am
- Forum: General support questions
- Topic: Issues connecting Dash2 to PC
- Replies: 2
- Views: 27970
Re: Issues connecting Dash2 to PC
Which firmware version are you using on your DASH2? If you want to use V10 PC software it will only communicate with V10 firmware on the dash, so you must reflash the dash. BEWARE though - if you upgrade to V10 firmware you will have to recreate your dash configuration because older configuration fi...
- Sat Aug 21, 2021 9:05 am
- Forum: Installation questions
- Topic: Dash 2 Pro Accelerometer calibration
- Replies: 1
- Views: 26732
Re: Dash 2 Pro Accelerometer calibration
Hello Bill,
https://www.race-technology.com/wiki/in ... uStructure
See menu item 6.4
With the vehicle in a flat and level stance this will zero the accel in all 3 axes.
https://www.race-technology.com/wiki/in ... uStructure
See menu item 6.4
With the vehicle in a flat and level stance this will zero the accel in all 3 axes.
- Thu Jul 15, 2021 9:50 am
- Forum: General support questions
- Topic: Dash 2 ,no display
- Replies: 8
- Views: 41958
Re: Dash 2 ,no display
Hello Martin,
Please send a photograph of the display with the power on to support@race-technology.com
This will reach me and I will then be able to diagnose the issue and advise on next steps.
Regards,
Lorne Winborn
Please send a photograph of the display with the power on to support@race-technology.com
This will reach me and I will then be able to diagnose the issue and advise on next steps.
Regards,
Lorne Winborn