Search found 263 matches

by racetec
Wed Jan 10, 2024 2:25 pm
Forum: Installation questions
Topic: Dash 4 Pro inline connector pinouts
Replies: 3
Views: 6340

Re: Dash 4 Pro inline connector pinouts

Hello Chris,

The DASH4 PRO is available with different cable and connector options. What wire colours do you see and what connector type do you have?
by racetec
Tue Jan 02, 2024 12:50 pm
Forum: General support questions
Topic: GPS lock with older DL-1 Club
Replies: 2
Views: 7940

Re: GPS lock with older DL-1 Club

Hello, Reflashing will not help and a discharged internal battery would not explain this either. If you are sure that at least one of the antennas you have used is working, the only option is to return the DL1 to us for inspection and repair. To arrange this please submit a support form via our supp...
by racetec
Wed Aug 30, 2023 6:48 am
Forum: GoPro standalone software
Topic: video merge
Replies: 1
Views: 15733

Re: video merge

Thank you for your request, we will discuss your feature request with the software engineers to see if the GPS data is essential to align or check the alignment of the joined GoPro video chapters.
by racetec
Wed Apr 26, 2023 9:23 am
Forum: General support questions
Topic: Bought used DL1 Club & Dash4Pro and need 101 to get started
Replies: 1
Views: 22197

Re: Bought used DL1 Club & Dash4Pro and need 101 to get started

Good morning Please visit the online knowledge base for operating instructions and 'how to' guides: https://www.race-technology.com/wiki/index.php/Hardware/DL1MK3 https://www.race-technology.com/wiki/index.php/Hardware/DASH4PRO2 The knowledge base covers installation, operation and configuration ins...
by racetec
Wed Apr 05, 2023 6:20 am
Forum: General support questions
Topic: No data saved to SD card again
Replies: 1
Views: 21900

Re: No data saved to SD card again

Hello,

To access technical support please complete the support form here:

https://www.race-technology.com/gb/racing/pages/support
by racetec
Fri Mar 24, 2023 9:38 am
Forum: Sensor-related questions
Topic: Vehicle speed bmw e30 options?
Replies: 13
Views: 151633

Re: Vehicle speed bmw e30 options?

If you send your dash configuration file to support@race-technology.com we will check it.
by racetec
Thu Mar 16, 2023 9:29 am
Forum: General support questions
Topic: DTA T2 ecu to Dash2 via CAN interface
Replies: 5
Views: 37964

Re: DTA T2 ecu to Dash2 via CAN interface

DTA S40 S60 S80

Not DTA S40 S60 S80 - serial

DTA S-series and T-series outputs are the same for the purpose of this endeavour.
by racetec
Tue Jan 24, 2023 9:55 am
Forum: Sensor-related questions
Topic: Vehicle speed bmw e30 options?
Replies: 13
Views: 151633

Re: Vehicle speed bmw e30 options?

You need to use the yellow wire output. This is configured to divide by 8, so will give 6 pulses per rev of your 48 tooth ABS ring. In the DASH2 config software you use this 6 pulse per rev information along with your tyre size to calibrate the speedometer.
by racetec
Mon Jan 16, 2023 2:06 pm
Forum: Sensor-related questions
Topic: Vehicle speed bmw e30 options?
Replies: 13
Views: 151633

Re: Vehicle speed bmw e30 options?

The VRS Signal Conditioner is only required for the vehicle speed signal. If you tee into the sensor wires the ABS will still work. The VRS Signal Conditioner output connects to the wheel speed input of the DASH2.
by racetec
Mon Jan 16, 2023 10:00 am
Forum: Sensor-related questions
Topic: Vehicle speed bmw e30 options?
Replies: 13
Views: 151633

Re: Vehicle speed bmw e30 options?

Hello, You will need an RPM conditioner for the RPM signal and a VRS Signal Conditioner if you wish to use the ABS sensor. https://www.race-technology.com/gb/racing/products/sensors/miscellaneous-sensors/miscellaneous-sensors_rpm-conditioner https://www.race-technology.com/gb/racing/products/sensors...
by racetec
Mon Nov 28, 2022 9:52 am
Forum: Installation questions
Topic: Brake Warning Light - 0V to Activate?
Replies: 3
Views: 41735

Re: Brake Warning Light - 0V to Activate?

Connect one side of the fluid level switch to the DASH2 wire mentioned. Connect the other side of the fluid level switch to ground. When the fluid level is low the switch is closed and the DASH2 input is grounded to 0V. Hey presto.
by racetec
Tue Nov 15, 2022 9:07 am
Forum: Sensor-related questions
Topic: Bosch0280130026 Pull-up Resistor
Replies: 5
Views: 34286

Re: Bosch0280130026 Pull-up Resistor

Then something in your wiring is incorrect. You must follow the connections or a "2-wire" sensor described here:

https://www.race-technology.com/wiki/in ... WireSensor
by racetec
Mon Nov 14, 2022 9:46 am
Forum: Sensor-related questions
Topic: Bosch0280130026 Pull-up Resistor
Replies: 5
Views: 34286

Re: Bosch0280130026 Pull-up Resistor

Have you installed this sensor with a cable supplied by Race Technology or did you make your own cable?
by racetec
Mon Oct 10, 2022 11:24 am
Forum: General support questions
Topic: Dash2 Rev counter erratic
Replies: 1
Views: 24353

Re: Dash2 Rev counter erratic

Hello,

Please would you visit the support page and fill in the form there with as much detail as possible, then one of our support staff will contact you. The more detail you give the more help we can offer to resolve your issue.

Regards,
Race Technology
by racetec
Thu Aug 25, 2022 9:29 am
Forum: General support questions
Topic: Dash 4 Pro - DTA T-Series - RPM Display
Replies: 1
Views: 22740

Re: Dash 4 Pro - DTA T-Series - RPM Display

Hello,

If you send your DASH4PRO config to support@race-technology.com we will inspect this and advise further.

Regards,
Race Technology Support

Go to advanced search