Search found 21 matches
- Tue Feb 23, 2021 5:41 pm
- Forum: General software support
- Topic: Dash 2 firmware
- Replies: 7
- Views: 27942
Re: Dash 2 firmware
Did this firmware issue with older Dash2 and v10 ever get fixed?
- Sun Nov 05, 2017 10:36 pm
- Forum: General software support
- Topic: Dash 2 firmware
- Replies: 7
- Views: 27942
Re: Dash 2 firmware
I had the same issue.
Firmware 10 for the Dash2 didn’t work with pressure sensors from my Ecu.
Went back to 9.3.5 and it works.
You’ll find the older firmware in the “flash” folder in the c: program files folder for the race technology software.
Firmware 10 for the Dash2 didn’t work with pressure sensors from my Ecu.
Went back to 9.3.5 and it works.
You’ll find the older firmware in the “flash” folder in the c: program files folder for the race technology software.
- Sun Oct 22, 2017 9:49 pm
- Forum: General software support
- Topic: Link G4+ and Dash2
- Replies: 3
- Views: 12077
Re: Link G4+ and Dash2
Have just emailed thanks. Didn’t get a reply notification so sorry for the delay
- Fri Sep 22, 2017 9:34 pm
- Forum: General software support
- Topic: Link G4+ and Dash2
- Replies: 3
- Views: 12077
Re: Link G4+ and Dash2
Right I’ve got the two units talking.
But can I set the Dash2 (not pro!) to read custom CAN data? For example the lambda signal isn’t on the pre set Vipec/link drop down.
But can I set the Dash2 (not pro!) to read custom CAN data? For example the lambda signal isn’t on the pre set Vipec/link drop down.
- Fri Sep 22, 2017 4:33 pm
- Forum: General software support
- Topic: Link G4+ and Dash2
- Replies: 3
- Views: 12077
Link G4+ and Dash2
Does anyone have a config file for a Link to Dash2 (not pro) via CAN please?
Would save me putting them all in.
Thanks!
Would save me putting them all in.
Thanks!
- Mon May 08, 2017 10:29 pm
- Forum: General software support
- Topic: Dash2 and Link G4+ interface
- Replies: 4
- Views: 10377
Re: Dash2 and Link G4+ interface
No problem, it's still a cheaper option than buying a new Dash2 pro if I can do it with CAN on my Dash2.
Thanks
Thanks
- Mon May 08, 2017 9:30 am
- Forum: General software support
- Topic: Dash2 and Link G4+ interface
- Replies: 4
- Views: 10377
Re: Dash2 and Link G4+ interface
Thank you for the reply. I will get in touch with Link about the possible changed serial protocols.
Can the older dash 2 (i.e. The one I have) connect via can? Could I rewire the connection to use that instead with the Ecu interface I have?
Marc
Can the older dash 2 (i.e. The one I have) connect via can? Could I rewire the connection to use that instead with the Ecu interface I have?
Marc
- Sat May 06, 2017 7:59 am
- Forum: General software support
- Topic: Dash2 and Link G4+ interface
- Replies: 4
- Views: 10377
Dash2 and Link G4+ interface
I have an older Dash2 with the Serial Ecu interface (I originally bought this for my old Link G4 storm) I have now upgraded to the Link G4+ Fury, however I can't get any of the AN Volt signals to appear on the dash2 I've followed the guide and setup he Dash2 using the Aux14 onwards as the AN Volt ch...
- Sun Apr 05, 2015 5:31 am
- Forum: Installation questions
- Topic: Dash2 input buttons
- Replies: 6
- Views: 22087
- Fri Apr 03, 2015 2:56 am
- Forum: Installation questions
- Topic: Dash2 input buttons
- Replies: 6
- Views: 22087
- Mon Mar 30, 2015 9:34 am
- Forum: Installation questions
- Topic: Dash2 input buttons
- Replies: 6
- Views: 22087
- Mon Mar 23, 2015 4:24 am
- Forum: Installation questions
- Topic: Dash2 input buttons
- Replies: 6
- Views: 22087
Dash2 input buttons
Hello, having installed my Dash 2 im not keen on having 4 buttons on the dash so im looking at a system using an Arduino chip that converts programmed specific resistance readings into digital outputs. Basically im using a 4 cruise control lever to simulate the 4 buttons. Each way on the lever gives...
- Mon Apr 30, 2012 6:10 pm
- Forum: Installation questions
- Topic: Dash2 with Link g4 - only showing 2 readings?
- Replies: 1
- Views: 6467
Right a bit more research and i seem to have solved both in one!
using the diagram in this thread:
http://www.race-technology.com/forum/vi ... 2&start=15
I had the Rx to Rx and Tx to Tx when the should be opposing. Doh!
switched them round and voila, dash now reads ecu and the third input now appears!
hope this helps someone else.
using the diagram in this thread:
http://www.race-technology.com/forum/vi ... 2&start=15
I had the Rx to Rx and Tx to Tx when the should be opposing. Doh!
switched them round and voila, dash now reads ecu and the third input now appears!
hope this helps someone else.
- Mon Apr 30, 2012 4:51 pm
- Forum: Installation questions
- Topic: Dash2 with Link g4 - only showing 2 readings?
- Replies: 1
- Views: 6467
Dash2 with Link g4 - only showing 2 readings?
Hello, i have a dash 2 and ive installed it in my Lexus with a Link G4. I have 2 problems though: 1- the dash2 only shows 2 readings - the large one on the right, and the middle one. I cant get the left hand reading to appear?! 2- Talking to the link g4 seems not to want to happen. Ive connect the d...
- Sun Nov 20, 2011 9:23 pm
- Forum: General support questions
- Topic: DL1 + Dash2 + LINK/Vipec = looses RPM every now and then.
- Replies: 3
- Views: 6634