I recently had to format my computer and lost all of my sensor data and formulas for the dash.

My dl1 and dash 3 are both still in the car. Is there any way of reading the information? it has taken me ages to get it the way I have it now.

doesn't > mean more than? and < less than?

how can i add this into an already long equation i have that flashes my shift lights when oil pressure is low? is there any info on creating equations? are there any limits to the length and complexity of the equations?

would it be long enough to be captured and be viewed in the analysis software? I would have thought that 100hz with no smooth over should be enough to capture any knock.

Is it possible to use an analogue input on the DL1 (mk2) for a knock sensor? my ECU is not capable of knock sensing so it would be nice if i could get the data logger to record it and then i could use that information to display a warning on the dash. from what i understand the signal wire from the ...

Or you have just downshifted three gears by mistake Yea or that haha. So when its in an alarm condition you loose shift lights? I guess the alarm condition will have to be really important rather than an indication or warning. The shift lights work as normal until an alarm is activated. The shift l...

tried this today and it works a treat!

I decided to set my all lights flashing to 10,000rpm and use that for the alarms only so when the lights flash i know its an alarm.

this is great! thanks! So just to be clear i can have the shift lights working as normal until there is an alarm and then have the shift lights flashing (by doing as you have described) along with a display telling me what the alarm is (by setting the alarm in the variable) as long as the 2 are set ...

Any update on this. There were replies saying the software will be updated to flash the shift lights but I can't see them now. Is this update going to happen?

can you confirm the next update will fix this problem? when will the update be? should be a pretty easy fix rite?

can you confirm the next update will fix this problem? when will the update be? should be a pretty easy fix rite?

can you confirm the next update will fix this problem? when will the update be? should be a pretty easy fix rite?

That's absolutely stupid. What is the point of being able to set up a warning system if there is no proper warning? I have no gauges in the car at all and was planning on using the warnings to alert me of any problems. The motec does have an output for a warning but I have all of my inputs going int...

sorry, double post.

i have a dl1 with motec ecu interface and a dash3. i have many high/low warnings set up such as high/low oil pressure, overboost, water temp, oil temp, etc. The problem is that when an alarm is activated the screen just changes to display the warning and the shift lights no longer illuminate. its ju...

i have a dl1 with motec ecu interface and a dash3. i have many high/low warnings set up such as high/low oil pressure, overboost, water temp, oil temp, etc. The problem is that when an alarm is activated the screen just changes to display the warning and the shift lights no longer illuminate. its ju...