Files have been sent. Thank You

No problem, I will go through the whole story so it will be clearer. When I first bought the DL1 I had a different car and since I used a stock dash and it had volts I never found the need to pay much attention to volts with the DL1. I am almost 100% that volts was a choice in the variables in the a...

I get that I can hook up to one of the channels to get volts. But what I dont get is it was built to read volts dedicated in channel 8. I also understand the newer version of the DL1 has an input for 8 now but since mine doesn't shouldn't it still be reading volts like it always has. If so why doesn...

I am confused then. I dont have a input for analogue 8 so I cant use it for anything now even volts?

Mat

I thought the DL1 had a channel was automatically designated for volts. So I thought it could be done with out using a seperate input. Analoge 8 I thought but that did not work.

Mat

How do I get the volts to dislay on my dash. I find all the analoge inputs and DL1 Mk1 inputs but none are labled volts.

So what do I choose to get volts displayed on the dash 2.

Is there any way to use a lap beacon?

I see the info on the lap strip for carts but can this be used for a standard lap beacon?

I will check to see if I have the latest firmware.

Thank you

I tried the lap timing function on my Dash this weekend with poor results. I set the track marker on the Dash with the momentary button for the dash. The dash will say new marker like it should but I would only occasionally get a lap time. Sometimes I would get two laps added together and other time...

Sorry, I swear I posted a reply to this a while ago but its not here. I had the DL1 on a bench and attached to a battery. So I unhooked the battery to turn it on and off and no response.
Mat

Sorry I am no help but at least you are a step further than I ever got. In the hyperterminal I never get a message from the DL1. Hopefully there are some tips out there.
Mat

I have now started to work with this again. I have recently installed the dash and am getting ready for the season. On the dash one of the screens shows Lateral data and it shows even sitting still the Gs to be -4.7. This matches the data shown on the downloads. So I tried to recalibrate the acceler...

I spoke with Al at race tech USA today. He said the sensors ordered from him are the ones found in the DL1 and Dash programs. It would make sense but it would also make sense for it to be listed in the help to use the preprogrammed function and not give an equation then.

Mat

OK the problem goes on. I used the DL1 software and inputting the equations was no problem. I am now also using a Dash 2 and in the set up program it does not allow for any equation to be put in place. It has blanks for the equation (polynomial i believe) and that is not the equation I have for pres...

Actually I was talking about the race performance expo at pheasant run. I have never been but I was surprised at the number of vendors. It runs sat and sunday and I will be there both days it looks like.

Mat