Search found 6 matches

by Seiz
Mon Aug 11, 2014 11:02 am
Forum: Sensor-related questions
Topic: BMW E36 M3 S50B32 oil and water temperature senders
Replies: 10
Views: 30332

With software like scantool connected to the ODB and Monitor Lite beside , he must make the temperature reading / voltage.
by Seiz
Wed Jul 30, 2014 11:50 am
Forum: Sensor-related questions
Topic: Dash2 on Clio 2 Mk1 2.0 16v with original harness and sensor
Replies: 5
Views: 15344

Hello ! Some news about my work. Firstly, after having connected the water temperature sensor, so I attack the fuel gauge. With a resistance of 300ohms it works perfectly! Then I wanted to continue with the oil temperature sensor and I ran quickly to a problem. Indeed, the 5v power dash2 only suppor...
by Seiz
Thu Jul 24, 2014 7:52 am
Forum: Sensor-related questions
Topic: Dash2 on Clio 2 Mk1 2.0 16v with original harness and sensor
Replies: 5
Views: 15344

Hello there. So after several attempts, the water temperature is displayed. Remains to check the values. Then I attacked the fuel level. Resistance of 300ohm because the gauge goes from 0 ohm to 300 ohms. I just hangs on the type of equation to put in the dash configuration? Have you any idea? I've ...
by Seiz
Tue Jul 22, 2014 10:38 pm
Forum: Sensor-related questions
Topic: Dash2 on Clio 2 Mk1 2.0 16v with original harness and sensor
Replies: 5
Views: 15344

It works!!!!!! Too happy!

Image Image


Another big thank you!
by Seiz
Tue Jul 22, 2014 10:01 pm
Forum: Sensor-related questions
Topic: Dash2 on Clio 2 Mk1 2.0 16v with original harness and sensor
Replies: 5
Views: 15344

Thank you so much for your answer. In France I have not found any info and this may be a first (I like to be avangardist). I actually would like to re-use the original temperature sensor because the ECU use it again. http://imagizer.imageshack.us/v2/280x200q90/674/71a263.jpg I have not (yet) mounted...
by Seiz
Tue Jul 22, 2014 1:17 pm
Forum: Sensor-related questions
Topic: Dash2 on Clio 2 Mk1 2.0 16v with original harness and sensor
Replies: 5
Views: 15344

Dash2 on Clio 2 Mk1 2.0 16v with original harness and sensor

Hello. I'm french so please excuse my English. First of all, congratulations for the support that you bring to your customers. It is much appreciated! If I posts here is that I need you. I wired my new dash2 on the origin of my Clio beam. I transplanted information on the original counter terminals....

Go to advanced search