Search found 8 matches

by anthony pearce
Thu Apr 23, 2020 1:01 pm
Forum: Sensor-related questions
Topic: oil pressure sensor checks
Replies: 5
Views: 32622

Re: oil pressure sensor checks

Have not received a response from RT on this subject. in fact I am disappointed at the poor level of response from RT and concerned at the level of problems experience by customers, a lot of which seem tobe unresolved. Does not give confidence in reliability
by anthony pearce
Wed Apr 01, 2020 1:30 pm
Forum: Sensor-related questions
Topic: oil pressure sensor checks
Replies: 5
Views: 32622

Re: oil pressure sensor checks

I was wanting to undertake static electrical checks, rather than a full pressure calibration.
Checks completed to date do not appear to measure the drop down resistance that RT say is fitted to their supplied units, and I cannot get nny measurement of the basic resistance of the pressure sensor.
by anthony pearce
Mon Mar 30, 2020 4:04 pm
Forum: Sensor-related questions
Topic: oil pressure sensor checks
Replies: 5
Views: 32622

oil pressure sensor checks

Is there a recommended procedure for checking an RT oil pressure sensor using a Multi-meter.
by anthony pearce
Thu Mar 28, 2019 3:51 pm
Forum: Installation questions
Topic: engine malfunction warning and OE oil pressure switch warnings.
Replies: 5
Views: 31891

Re: engine malfunction warning and OE oil pressure switch warnings.

MARTIN, I AM STILL COCERNED REGARDING THE MALFUCTION AND OILPRESSURE WARNINGS. Your last response quotes" should be able to connect inputs directly to the analogue inputs etc etc". A connection ( joining of wires)can be made as advised, but I am looking for more confidence that it is not going to da...
by anthony pearce
Fri Mar 22, 2019 3:15 pm
Forum: Installation questions
Topic: engine malfunction warning and OE oil pressure switch warnings.
Replies: 5
Views: 31891

Re: engine malfunction warning and OE oil pressure switch warnings.

martin, Can you clarify your comments with a little more info. The ecu malfunction output is low at less than 3v for the indication of a fault and 12v pluse when no fault existis. In the case of the oil pressure switch, the ninitial low pressure on start is a 12v output and once the pressure has rea...
by anthony pearce
Thu Mar 14, 2019 4:46 pm
Forum: Installation questions
Topic: engine malfunction warning and OE oil pressure switch warnings.
Replies: 5
Views: 31891

engine malfunction warning and OE oil pressure switch warnings.

seeking advice on wiring up the oem low oil pressure switch and ecu malfunction warning output, to give warning display on Dash 2 pro. I am looking for info on the circuit/resistors recommended/ required to connect to two spare Analogue input /out driver, and hence a display warning.
by anthony pearce
Sun Oct 07, 2018 9:58 am
Forum: Installation questions
Topic: requirement for diodes in circuits.
Replies: 1
Views: 27707

requirement for diodes in circuits.

The OEM vehicle wiring diagrams show diodes being fitted to a number of circuits, in particular, some of those that involve the instrument display/combination meters. When replacing or building a instrument display using a dash 2 pro unit as upgrade is there a requirement to embody similar diodes to...

Go to advanced search