Search found 8 matches

by kbs200
Thu Feb 13, 2020 5:32 pm
Forum: Sensor-related questions
Topic: fuel sensor pull up resistor issue.
Replies: 7
Views: 3788

Re: fuel sensor pull up resistor issue.

just threw a couple of resisters in Parallel and got 165.5 ohms, that should do the trick, now shall i use the dash2 5v reference or fit a 5v regulator just for the fuel sender?
by kbs200
Thu Feb 13, 2020 3:56 pm
Forum: Sensor-related questions
Topic: fuel sensor pull up resistor issue.
Replies: 7
Views: 3788

Re: fuel sensor pull up resistor issue.

A 120 Ohm resistor is just about acceptable. Something closer to 150 Ohms would be safer. In all cases it needs to be 0.25W resistor or larger. A 0.125W resistor may overheat and fail. thank you for the reply, so if i got a resistor closer to the full sender swing of 160 ohms like a 180 ohm resisto...
by kbs200
Thu Feb 13, 2020 1:35 pm
Forum: Sensor-related questions
Topic: fuel sensor pull up resistor issue.
Replies: 7
Views: 3788

Re: fuel sensor pull up resistor issue.

yes i have a bosch water temp sensor connected that reads the same value as the ecu so thats all working fine.
by kbs200
Thu Feb 13, 2020 1:02 pm
Forum: Sensor-related questions
Topic: fuel sensor pull up resistor issue.
Replies: 7
Views: 3788

Re: fuel sensor pull up resistor issue.

Anyone!!
by kbs200
Thu Feb 13, 2020 9:23 am
Forum: Sensor-related questions
Topic: fuel sensor pull up resistor issue.
Replies: 7
Views: 3788

Re: fuel sensor pull up resistor issue.

ok just took some resistance readings from the sender unit, 10 ohm full and 160 ohm empty, the 1K resistor that is suggested is way off so would a 120 ohm resister be ok?
by kbs200
Wed Feb 12, 2020 5:42 pm
Forum: Sensor-related questions
Topic: fuel sensor pull up resistor issue.
Replies: 7
Views: 3788

fuel sensor pull up resistor issue.

i have looked in the forum for an answer but nothing seems like my issue, i am using the ford fuel sender in the stock tank, i have used the 5v reference from the dash 2 and 1k pull up resistor. i emptied my tank and took a reading of 0.57v, i then started to add fuel 1L at a time and the voltage de...
by kbs200
Tue May 21, 2019 8:49 pm
Forum: How do I...
Topic: odometer setup
Replies: 3
Views: 2883

Re: odometer setup

thank you for both your replies :)
by kbs200
Mon May 20, 2019 8:19 pm
Forum: How do I...
Topic: odometer setup
Replies: 3
Views: 2883

odometer setup

is there a way to match the race dash odometer to my current car odometer, the unit is new and the speed sensor is not set up yet! :shock:

Go to advanced search