In order to have a DL-1 properly communicate with a Dash2 and to use a button as a lap marker is it necessary to set the "Incoming Serial Data" setting in the "Serial Port" column to "Enabled"?

Installed a new Setup.bin file and the DL-1 is back to making run files. Questions: Should the SETUP.BIN file remain on the memory card? Is there a problem if it does? Should the .LAP file remain on the memory card? Is there a problem if it does? Should the DASH.DAT (Dash2 config file) remain on the...

My DL-1 has found yet another way to make me crazy. This weekend, instead of creating a .run file, it created a folder (sub-directory) with the name typically used for the run file. These folders were stored in the dated folder that is usually created. I tried reformatting the disk and it did the sa...

Yes Randy, that because you reflashed "Muda's" Dash2. ( :

My setup is a DL-1 (mk1-latest firmware) and a Dash2. I've owned the DL-1 for years. Got as far as the warning on the v7 configuration software. My new Dash2 has a tag on the case marked July, 2007. However, when I power on with the "down" button made (brown and white wires touching) to tr...

Martin -

Please resend the latest firmware for my DL-1, early version with serial port in front and green connectors in back as I didn't receive it.

Thanks again!

ccane@att.net

Please send me the latest firmware for my DL-1, early version with serial port in front and green connectors in back.

Send to ccane AT att DOT net

Thanks!

My DL-1 failed to record a full session 5 out of the last six attemptes. File sizes for a full session are about 5mb and the aborted file sizes are about 1.5mb. What can I do to correct this problem? Additionally, I want to reflash to utilize the autostart function but every link on this site merely...