Search found 295 matches

by racetec
Mon Jul 15, 2019 12:11 pm
Forum: How do I...
Topic: Frequency input timeout
Replies: 9
Views: 4283

Re: Frequency input timeout

I am not sure what you are disagreeing about. The spec for the frequency input messages is here: https://www.race-technology.com/wiki/index.php/DataAndConfigurationMessages/14-17FrequencyInputs As you will see, it is stored as a time period between successive pulses in multiples of 1/6 us. 3 byte co...
by racetec
Mon Jul 15, 2019 10:25 am
Forum: General support questions
Topic: Logging ECU data (ECU adapters)
Replies: 12
Views: 30944

Re: Logging ECU data (ECU adapters)

Yes the PIDs are common across cars for the OBDII interface. They are not transmitted continuously by the vehicle though, they are only sent in response to a request. As such, you will need something which will send the request to the vehicle and then decode the answer when it comes back. The typica...
by racetec
Mon Jul 15, 2019 9:05 am
Forum: How do I...
Topic: Frequency input timeout
Replies: 9
Views: 4283

Re: Frequency input timeout

The DL1 doesn't log the frequency. It logs a counter value each time that a pulse arrives. Whatever is looking at the data from the DL1 then looks at the time interval between the pulses and calculates the frequency. If there is no pulse, at what point should the DL1 say that there is a non-existant...
by racetec
Mon Jul 15, 2019 8:58 am
Forum: How do I...
Topic: Reset pulse count
Replies: 8
Views: 4495

Re: Reset pulse count

I believe that there is a way you will be able to get what you want, but not in a direct way. Have a look here: https://www.race-technology.com/wiki/index.php/DL1MK3Configuration/VariableMapping Look at the section right at the bottom about the order in which values are calculated. This makes it pos...
by racetec
Fri Jul 12, 2019 9:23 am
Forum: General support questions
Topic: Logging ECU data (ECU adapters)
Replies: 12
Views: 30944

Re: Logging ECU data (ECU adapters)

The only instance in which the CAN adapter would add anything in your setup was if you wanted to get the data off the OBDII bus through the vehicle CAN bus. This can't be done from the DL1 directly. As you mention, the big problem you will have with connecting directly to the vehicle CAN bus is not ...
by racetec
Wed Jul 10, 2019 12:20 pm
Forum: How do I...
Topic: Reset pulse count
Replies: 8
Views: 4495

Re: Reset pulse count

Which version of the DL1 are you doing this with, it is one which logs to an SD card or CF card?

Martin
by racetec
Wed Jul 10, 2019 12:19 pm
Forum: How do I...
Topic: Frequency input timeout
Replies: 9
Views: 4283

Re: Frequency input timeout

Where are you looking at the data from the data loggers? This timeout is more a function of the display than the data logger, as the data logger is designed to record and count the pulses. There is no method for it to log not having a pulse. As such, any timeout would need to be incorporated in to t...
by racetec
Mon Jul 08, 2019 10:46 am
Forum: General support questions
Topic: CtrlOP 4 still ON
Replies: 3
Views: 3219

Re: CtrlOP 4 still ON

Hello

This means that control output 4 is configured to be use, but nothing is connected to it. To get rid of this message, simply reconfigure the Dl1 with control output 4 disabled.

Support (AH)
by racetec
Thu Jul 04, 2019 12:45 pm
Forum: General support questions
Topic: DL1 and Video4 not recording video
Replies: 1
Views: 2628

Re: DL1 and Video4 not recording video

Hello Marcus

I understand that a member of our technical support team has now contacted you directly via email.
Please let me know if you have not received this and I will look into it.

Best regards,
Support (AH)
by racetec
Thu Jul 04, 2019 12:44 pm
Forum: General support questions
Topic: Starting recording a better visual
Replies: 3
Views: 4753

Re: Starting recording a better visual

Hi Marcus Apologies if you have not previously received a response from our technical support team. A member of our support team has now sent an email to you, which you should have received yesterday. Please let me know if you have not received this and I will look into it. Best regards, Support (AH)
by racetec
Mon Jul 01, 2019 8:04 am
Forum: General support questions
Topic: Sending serial data to DL1 MkII
Replies: 2
Views: 4064

Re: Sending serial data to DL1 MkII

Yes that is exactly how you do it. You can send it through as an analogue channel, or as temperature, pressure, etc. It can go in on the same port that the data is coming out from. If you are running the old DL1 MK2 config software then make sure that incoming serial is turned on for logging to the ...
by racetec
Wed Jun 12, 2019 8:49 am
Forum: Bug reports
Topic: no effect "optimize accelaration with gps data"
Replies: 3
Views: 3361

Re: no effect "optimize accelaration with gps data"

The GPS correction of accelerometers is generally good at correcting an offset in the DL1 mounting, and gradients - but its "too slow" for pitch correction during braking. If you are doing brake testing and require good accuracy we supply arrange of equipment for this exact purpose - if you want to ...
by racetec
Tue Jun 11, 2019 12:03 pm
Forum: Sensor-related questions
Topic: GPS data jumps (same spot, every lap)
Replies: 10
Views: 13169

Re: GPS data jumps (same spot, every lap)

The orientation is not correct, this can be changed in analysis options
by racetec
Mon Jun 03, 2019 8:43 am
Forum: Sensor-related questions
Topic: D2 PRo Accelerometer
Replies: 1
Views: 2456

Re: D2 PRo Accelerometer

For most applications no filtering is required. If you do find that you do require filtering then start of with small numbers such as 0.1 for the smoothing time, but a higher number and work downwards for the maximum rate of change, such as 10.

Martin
by racetec
Tue May 28, 2019 1:29 pm
Forum: Sensor-related questions
Topic: GPS data jumps (same spot, every lap)
Replies: 10
Views: 13169

Re: GPS data jumps (same spot, every lap)

Hello Thomas

The jumps are there as you've not got the mounting orientation correct, and you have the option set to combine GPS+accelerations.

Go to advanced search