Search found 326 matches
- Thu Oct 04, 2018 1:17 pm
- Forum: General support questions
- Topic: CAN interface, change of ecu
- Replies: 1
- Views: 8684
Re: CAN interface, change of ecu
Hello, It is a " return to base job " unfortunately, as we'll need to reprogram the CAN Adaptor for your new ECU ( DTA S60 ECU). Please email us at the following address to arrange return of your CAN Adaptor for reprogramming: service (at) race - technology (dot) com. Additionally, you'll find the ...
- Thu Oct 04, 2018 11:50 am
- Forum: General support questions
- Topic: Looking for Firmware updates
- Replies: 3
- Views: 30801
Re: Looking for Firmware updates
Hello,
If you still require these firmware files, email us: daniel (at) race - technology (dot) com.
Support(D)
If you still require these firmware files, email us: daniel (at) race - technology (dot) com.
Support(D)
- Thu Oct 04, 2018 11:44 am
- Forum: General software support
- Topic: Link G4+ extreme ecu and Dash 2 not receiving CAN
- Replies: 1
- Views: 11694
Re: Link G4+ extreme ecu and Dash 2 not receiving CAN
Hello, There are a few things to consider here: 1) Have you made the correct connections between the CAN Adaptor, DASH2 & ECU. 2) Have you configured the DASH2 to show the data from the ECU. 3) Have you configured the ECU to output the correct data to the DASH2. If you require more detailed informa...
- Thu Oct 04, 2018 11:14 am
- Forum: Sensor-related questions
- Topic: heart rate sensor
- Replies: 19
- Views: 110402
Re: heart rate sensor
Hello,
If anyone is still interested, you can purchase our heart rate monitor here - https://www.race-technology.com/gb/raci ... te-monitor.
Support(D)
If anyone is still interested, you can purchase our heart rate monitor here - https://www.race-technology.com/gb/raci ... te-monitor.
Support(D)
- Thu Oct 04, 2018 11:09 am
- Forum: General software support
- Topic: Dash 2 sensors set up
- Replies: 4
- Views: 22864
Re: Dash 2 sensors set up
Hello, You have a few options in this situation. 1) Use one of our ECU interfaces / CAN adaptors to obtain the data from the ECU & display it on the dash. However check if your model of DTA ECU is on our list of compatible aftermarket ECUs first - http://www.race-technology.com/gb/racing/products/e...
- Wed Oct 03, 2018 3:08 pm
- Forum: General support questions
- Topic: Live Monitor showing incorrect analogue voltage readings
- Replies: 1
- Views: 8840
Re: Live Monitor showing incorrect analogue voltage readings
Hello,
Can you send us your DL1 & DASH2 configuration files to my email: daniel (at) race - technology (dot) com for inspection? Additionally, some test data would be most useful in this situation.
Support (D)
Can you send us your DL1 & DASH2 configuration files to my email: daniel (at) race - technology (dot) com for inspection? Additionally, some test data would be most useful in this situation.
Support (D)
- Wed Oct 03, 2018 3:02 pm
- Forum: General support questions
- Topic: Approach for tracks where start line and finish line are not in the same place
- Replies: 2
- Views: 139493
Re: Approach for tracks where start line and finish line are not in the same place
Hello,
in this situation there are two options:
1) Drop the lap marker where the finish line is going to be on the circuit.
2) Use the analysis tool to drop "start of run" & "end of run" markers onto the circuit.
Support (D)
in this situation there are two options:
1) Drop the lap marker where the finish line is going to be on the circuit.
2) Use the analysis tool to drop "start of run" & "end of run" markers onto the circuit.
Support (D)
- Wed Oct 03, 2018 2:52 pm
- Forum: General support questions
- Topic: DL1 running 2 x displays ?
- Replies: 1
- Views: 8264
Re: DL1 running 2 x displays ?
Hello,
Check this out - http://www.race-technology.com/gb/racin ... tter-cable.
Support (D)
Check this out - http://www.race-technology.com/gb/racin ... tter-cable.
Support (D)
- Wed Oct 03, 2018 1:30 pm
- Forum: General support questions
- Topic: Dash2 Fuel Level Clip at 0 and 100?
- Replies: 1
- Views: 8283
Re: Dash2 Fuel Level Clip at 0 and 100?
Hello,
Please send your DASH2 configuration file & voltage versus fuel level readings to my email: daniel (at) race - technology (dot) com for inspection.
Support (D)
Please send your DASH2 configuration file & voltage versus fuel level readings to my email: daniel (at) race - technology (dot) com for inspection.
Support (D)
- Wed Oct 03, 2018 12:25 pm
- Forum: General software support
- Topic: system fail to communicate send configuration ERROR
- Replies: 1
- Views: 11312
Re: system fail to communicate send configuration ERROR
Dear Customer, Try connecting the DASH2 directly to the computer if you haven't already i.e. black D-type communications connector from the dashes wiring harness > USB to serial adaptor > computer USB port. If that doesn't work check the firmware version your DASH2 is running on i.e. press & hold t...
- Mon Sep 17, 2018 11:04 am
- Forum: General support questions
- Topic: Revs higher than 9000rpm and fuel sending question - motorbike related
- Replies: 5
- Views: 12150
Re: Revs higher than 9000rpm and fuel sending question - motorbike related
Hello,
Yes it is possible to increase the odometer reading. Please email sales @ race - technology . com for a quote.
Kind regards,
Support (K)
Yes it is possible to increase the odometer reading. Please email sales @ race - technology . com for a quote.
Kind regards,
Support (K)
- Mon Sep 17, 2018 10:50 am
- Forum: General support questions
- Topic: Revs higher than 9000rpm and fuel sending question - motorbike related
- Replies: 5
- Views: 12150
Re: Revs higher than 9000rpm and fuel sending question - motorbike related
Hello, 1) No. You can entre any value between 0-19. The advisory message means each box must have a bigger value then the previous. For example 0 1 2 3 4 3 2 1 0 would not work. I am not sure why we needed to state that. ;-) http://i68.tinypic.com/1042007.jpg 2) Connect sensor like below. Resistor a...
- Tue Aug 28, 2018 2:18 pm
- Forum: General support questions
- Topic: DL1 MK1 No Longer Recording on CF Card
- Replies: 13
- Views: 59902
Re: DL1 MK1 No Longer Recording on CF Card
Hello, I can confirm Windows has stopped supporting the FAT16 filing system in Windows 10. You are also unable to refomat a memory card using the Race Technology software as the software only calls the Windows routine to format the card. I recommend buying a few cards and not reformatting them routi...
- Fri Jul 27, 2018 1:54 pm
- Forum: General support questions
- Topic: Boost Display/Logging - Dash 4 pro - DL1 Club, SC Typhoon ECU
- Replies: 1
- Views: 8645
Re: Boost Display/Logging - Dash 4 pro - DL1 Club, SC Typhoon ECU
Hello,
If you can email me the following I'll be able to assist:
- A copy of your DL1 CLUB configuration.
- A copy of your DASH4PRO configuration.
- A small .RUN file (around ten seconds): logged with the engine running & a 'few' blips of the throttle present.
Best regards,
Tech Support (D)
If you can email me the following I'll be able to assist:
- A copy of your DL1 CLUB configuration.
- A copy of your DASH4PRO configuration.
- A small .RUN file (around ten seconds): logged with the engine running & a 'few' blips of the throttle present.
Best regards,
Tech Support (D)
- Fri Jul 27, 2018 1:39 pm
- Forum: General support questions
- Topic: DL1/Dash2 Does not start logging
- Replies: 10
- Views: 27805
Re: DL1/Dash2 Does not start logging
Check your "Pulses per revolution" setting on your DASH2 configuration. Alternatively, send a copy of your DASH2 configuration to: daniel at race - technology dot com.
Best regards,
Tech Support (D)
Best regards,
Tech Support (D)