Hi It is not possible to display the date and time if you are using the DASH2 alone. If you are using the DASH2 with a data logger, it is possible to get the date and time information from the GPS. If you would like any assistance in setting this up, please email support@race-technology.com and a me...

Hi

Assuming you are running v8.5 of analysis, you can go to the file menu, then change swap file to increase the amount of data that can be loaded.
The maximum is currently about 32 hours )

Thanks, Support

If you go to, the data menu and select Analysis options... then look on the "Data" and "Database" tabs you will see links to the 2 directories where Analysis keeps all its internal options/configurations and databased files respectively. So go here, and copy them all to your back...

Thank you for highlighting this issue, we have been able to replicate it and will have fixed this issue in the next release of the software. We have found what has caused this and can suggest a work around for you so you can continue working before the next release of the software. When you save the...

We are checking this

Support (A)

Hi To convert a 720p to 1080p layout... 1/ make a "dummy" 1080p layout... so blank apart from some simple text or similar, save is as "dummy.vgl" 2/ load it your 720p layout, with the option to clear the old layout 3/ load in your 1080p dummy.vgl with the option to load this &quo...

The best thing is to have Analysis and the DASH3 config open at the same time and you can highlight and cut and paste the formulas as needed. Yes, it's manual, buts its a simple/quick job, and its only required once when setting the system up. Can I mark this topic as closed now please? Thanks, Supp...

You set the sensor up in the variable manager:

http://www.race-technology.com/wiki/ind ... riableTree

and then add a control to display that information for example a numerical
value:

http://www.race-technology.com/wiki/ind ... Properties

Support (A)

Hi, You are correct, the CMG format is not used on the DASH3, it uses the older HEX file format, however the general information is still correct in that this files does contain the equation information for any variables displayed. Whilst I agree that in some cases it would be more convenient to hav...

Hi Please note that if you use a variable on the DASH3 screen that has an equation, then this information IS saved in the CMG file... just load that, no VAR file is needed. As such is unusual to need to load in a variable file into the software, which is why this option was removed - the only senari...

Afternoon, Yes, the removal of the tab was indeed motivated by regular requests for more screen area... they are now accessible from the menu, but on the current release there is no way to rename them. In retrospect this was an error, and we hadn't realised how much tabs were used. Hence, in the nex...

Hello Charles,

Please email the serial number of your logger to me and I'll see what I can do for you.

lorne@race-technology.com

Regards, Lorne

Hi Sean We removed the tab interface as part of some general modernisation of analysis, it looked really bad on modern OS'. On the version on the web, you can only swap tabs (now layers) from the menu, and there is no way to set a name as you have seen. We actually hadn't appreciated how widely used...

Hi Paul

Please could you email me directly with the serial number of your data logger and we'll see what we can do for you.

sales@race-technology.com

Thanks
Adele

Hi Paul The latest RT software can be downloaded from here: m During installation it will ask you for a pin code - all you do is enter your email address and our server automatically emails the pin code to you. Type in this code and the software installation will complete. Hope this helps.