Thanks osborni. How big is the bolt that you're using as a trigger? In other what's the linear distance of the bolt that the sensor sees? I did some calcs and, you're right, it may work. My calcs show that it should take .89ms for the bolts to pass over the sensor at 100mph. The RT docs say that any...

osborni, Did you actually do what you wrote? It's contradicted by the documentation from both Cherry and RT. Cherry documentation says that the GS series sensors cannot do sourcing output (low when nothing in front of sensor, high when ferrous object in front of sensor). GS can only do sinking outpu...

Bump.

I'd like to get this figured out ASAP.

Thank you!

-Kyle

I have a Mk1 DL1 (sorry I should have said that). So per your website the latest firmware is "DL1 MK1 customer reflash V33 091215".

Why is the Mk1 firmware so far behind the Mk2?

-Kyle

Yes, it happens the same way with the CF card inserted and with no CF card.

I'm on what I believe to be the latest firmware. I flashed it in the spring. From the analysis software: "using firmware version 33-5"

-Kyle

If I power cycle the DL1 within one minute of turning it off, it hangs with all four LEDs lit.

If I wait over a minute, it comes back on as normal.

Is this working as designed?

-Kyle
DL1 and Dash2

The fact that we cant use the area at the bottom of the dash 2 (odometer area) is a giant disappointment.

Why is this area not available?

It would make the dash so much more useful.

All that wasted real estate ....

-Kyle

Until reading this thread I was unaware of the 8.3 uppercase file name restriction. However ... my lap timing works (mostly) and I have used lower case names exclusively. It gives me lap times, but not reliable sector times. Can Support please clarify the requirements and update the KB? <edit> - The...

Bump.

I'd like to know how to do this also. I'd like to compare data from two cars with completely different variables and car attributes.

Thank you,
Kyle

Bump.

I'd like to know if these senders have been calibrated or if the new formula is simply the result of seeing the error at zero PSI.

-Kyle

Dopple-bump.

Bump for a simple question!

WillM, As an experiment try removing the seal from the pigtail of your pressure sender and see if you get the same result. The seals come off and back on very easily. It maybe a very slight difference if you have 100psi senders (oil pressure) since the seals likely only create a few psi of pressure ...

9.1.9.

Bump.

Support,

Any thoughts on this question?