Mark,

See my responses to your email.

Maxx

Tris, I couldn't get the 2nd link to work. First link looks like electrical interferance, you should ensure the camera cable doesn't run close to any major current carrying cable. I went to your channel and watched this one which seems OK? m Even in your first video, it seem much better later on and...

Bikey,

Ah, sorry. Re-reading you initial mail now makes more sense to me.

Maxx

Bikey, Do you mean you'd like to see some video the data has been sync'd with a 3rd party video in the analysis software and exported? If so I have a couple that spring to mind. Mazda MX5/Miata at Donington Park - Race Footage from GoPro sync'd with DL1 data m V6 Evora engined Toyota MR2 Roadster at...

Matt,

I am assuming you have 'Define Sectors Automatically based on Markers' set in the Data->Lap & Sector Options->Sector Setup screen ?

If this was unticked it would behave as you describe.

Maxx

Thought this worth posting on here for anyone interested in the DASH4 Pro and to see how well it shows up.

It's not my car, it's a student of mine who loaned it to me to do the Birkett Relay.

http://www.youtube.com/watch?v=-mjB5WUdUKA

Maxx

Yes please, set him up guys.

Steve, Ah, sorry, been working with a V4GPS recently, as far as I know that is just valid for the V4+GPS. Back to the drawing board .. don't think it's this but maybe worth checking, in case the V4 is 'corrupting' the revs. In the V4 layout there is an RPM option under Configuration->RPM I think thi...

Steve, Not sure if this is your problem or not but there is a setting you need to check/set in the VIDEO4 Config file. If you go into Video->VIDEO4 Configuration Load the .VGL file you are using. Select Configurtion->Data Configuration In the Data-Input section make sure the 'RPM Input' is selected ...

Graham,

Remove the tick from [Interactive]

Maxx

I was doing come video overlay stuff so decided to give it a try, works a treat. Example below (note there wasnt supposed to be a pointer/readout for revs as not connected). m The VGL file is here, generally all you need to do is set the z-order to bottom for the greenscreen and top for everything e...

Load the firmware onto a clean CF card and power the unit with the card already inserted. Not an option for reflashing Mk1 or Mk2 DL1s as far as I am aware? Has to be done via the serial port. Maxx PS: Web35, worth checking the serial link is working OK with Monitor program (you should see data bei...

I think I had problems with something similar and so used another video converter app to convert the 30fps HD footage to 1024x568 @ 25fps which the Media to VD4 program converted fine. There are free programs that can do this 'Super' and 'Handbrake' are two that spring to mind. It does mean an extra...

Mike, You 'might' be able to use a bitmap file to 'blank out' the video. So if you created a 720x576 green bitmap, added this to your layout and set z-order to 'bottom' you gauges should show over the top with a totally green background. You could then use premieres green screen processing to superi...