That sounds entirely possible. You can use a lookup table mapping from one of the analogue inputs to an auxiliary channel for the display. The input would be the voltage and the output can be the percentage, litres, whatever you want. 1.9 0 some numbers in between 0.28 100 You must have a pullup res...

You should just be able to connect those input signals directly to the analogue inputs on the DASH2 PRO and look at the voltages in the Analysis software to confirm that they are operating correctly.

Martin

The analogue inputs on the DASH2 PRO have very weak pull downs on the inputs. So you need to make sure that the inputs are actively driven high by the ECU.

Martin

No, sorry. We only decode the messages as described in the knowledge base for this ECU.

Martin

Hello We can put together a new layout for you, email details of what you need to sales at race-technology dot com and I'll get it sorted out for you. Also note that the GoPro video handling is much improved in V10, so if you like I can get a test copy of that sent over so you can try it out. Suppor...

I am not sure what you mean on the four pin connector. The one with the SCL and SDA pins is an I2C sensor which you can not connect to the DL1, there is no way it can communicate directly with that. If the sensors need a 5v supply then you will be fine with the output from the DL1, this is a well re...

All that you will be able to see is what channels are configured on the different screens. You won't be able to see things like alarm settings. If you go in to the menu you will be able to see the settings for the things like the number of pulses per mile for the speedometer. These are the sort of s...

Not much information to go on there, but it sounds like the DL1 isn't outputting any data. Can you see the DL1 is operating as expected?

One of the big upgrades from the older firmware to the new one is the ability to read back the configuration from the unit. Unfortunately you can't do this with the older firmware so you will just have to note down the settings from looking at the screen and make up the new one from that if you don'...

Hi

We don't currently have a video tutorial. Please have a look at our knowledge base for more information:
https://www.race-technology.com/wiki/index.php/

Support (AH)

Yes, this is something we are actively working on right now and it will be available in our software soon.

Please contact me directly (adele at race hyphen technology dot com) as we may be able to provide some test software for you in the meantime.

Support (AH)

Hi Wyn

I have responded to your email. Please do not hesitate to contact us if you require any further assistance.

Support (AH)

Thanks for the feedback, I'll pass it on to the developers as a suggestion

Support (AH)

Hello

Yes, the dash can be returned to our service department for a replacement LCD and full service.

Please contact 'service at race-technology dot com' for more details.

Support (AH)

Hi

You can purchase a replacement connector from our website:
https://www.race-technology.com/gb/raci ... connectors

Support (AH)