Does Auto Start not reduce your ability to perform accelerometer offset compensation?

Has anyone found a good option/source for an illuminated remote start/stop button? In addition to the one RT sell of course!

I know you don't have brake lights, but is there a switch at all?

I just use a switch that switches 12v into an analogue input when the brake pedal is pressed. There are pull down resistors inside the DL1 already so nothing else is needed.

In my opinion, brake switch.

Yes, black with white trace. I actually think that the Stack feed and std Caterham Tacho feed are just two wires from the same ECU pin. A few people I race with had problems tapping the std tacho feed for the DL1, hence why I used the Stack pin. I guess that impedance issues are quite marginal so I ...

Adrian, I run my DL1 and Aces shift lights from the Stack tacho feed (my car doesn't have a Stack and so its spare), and the standard taco feed remains untouched. Unless there are impedence issues, it should work if you tap off the stack feed. I assume you are connecting to rL on the DL1. Charles

If it is from the ECU it should be to rL.

Just to add my thoughts on driving BH Indy so you don't feel left out . The kink between Druids and GH bend is insignificant except in terms of positioning for the turn in to GH bend. Whilst the run out of Druids can have some effect it is minimal and I definitely think of GH separately. Whilst brak...

Faraday - I agree with you, in fact I want quite the opposite. For example, if you use autosectors on BH Indy you end up with one too many so I have created my own sectors which roughly translate to PH Bend, Druids, GH Bend and the Surtees/McLaren/Clearways complex. I was more interested in seeing w...

Has anyone got a nice collection of sectors for UK circuits they would be willing to share? I've started playing with Brands Hatch Indy and I notice that the automatic sectors aren't quite where I'd want them to be so have been creating my own. If anyone has sets for other UK circuits I'd be very in...

Thanks Jeremy. I can't say I've particularly understood Interactive Mode yet so I'll give it a go.

Charles

Is it possible to get the track map to show line traces only for the current selected laps/sectors? I seem to get a thin black line for every lap in the current run which makes it difficult to pick out the individual laps I want to look at.

I have 10-5, just wondered whether it was the latest version.

Thanks Al, I'm making up cables myself.

I'm fitting an RT wheel speed sensor to my latest version DL1. Assuming it will go into one of the frequency inputs, is a pull up resistor still required?