Dash 2 pro Honda Civic type r ep3

[Colly]

Hi
I've just had dash2 pro fitted to my ep3 I have a couple of teething problems

The rev counter appears to be about 1k rpm out on idle? How do I fix this?

As the car has a static limiter sometimes I'm having issues with it kicking in sometimes as the dash is running of gps can I switch this to the ecu pickup

The gear indicator I have tried to set it by the gear ratios but they don't seem to be working

[Support (D)]

Hello,

To fix the rev counter you need to adjust the pulses per revolution, this can be found in the wheel speed and RPM section of the configuration software.

As for the static limiter and gear indicator, can you send me the configuration file installed on the dash currently? I'll inspect the config file and we'll take it from there.

Kind regards,
Support(D)

[Support (D)]

Email: daniel@race-technology.com

[Colly]

Thanks Daniel I will send the file tomorrow I've just seen this.

I did change the pulses but I seemed to knock the speedo of then?

[Itzluke2795]

Hi colly any chance I could have a copy of your config to use as a base for my ep3 type r? Many thanks