AFR TABLE
Posted: Tue Sep 29, 2009 12:35 pm
Is possible to make an AFR table with x rpm values and y tps values or kPa values for ecu adjust?
I'll need to manually put rps and tps values to has same values as racing Ecu to make AFR corrections.
In my ecu I can configure when uses TPS or IAP values so if I defined than ecu uses Iap values when tps is beetwen 0 and 1% and rpm 1500-3000 rpm I will have to filter this values for table x (rpm) and y (Kpa of IAP)
Is possible to define this table, log it and use ever fastly without new configuration??
I'll need to manually put rps and tps values to has same values as racing Ecu to make AFR corrections.
In my ecu I can configure when uses TPS or IAP values so if I defined than ecu uses Iap values when tps is beetwen 0 and 1% and rpm 1500-3000 rpm I will have to filter this values for table x (rpm) and y (Kpa of IAP)
Is possible to define this table, log it and use ever fastly without new configuration??