Hi All
I have looked but cannot seem to find the answer. I have some data from the weekend from a local hillclimb. Trouble is there is an offset in the quick graphs between the two data sets. I assume that the default plots are agains distance, from where, or is this GPS poisition??
Irresepective, I would like to move (in the graph display window), one set relative to the other so that the 'car' markers line up between runs. The 'drift' does seem to grow over time. I am just wanting to do a corner by corner 'eyeball' of the entire data set.
Thanks
Bill
Offsetting Data Sets for alignment needs
Thanks for the reply, but its not the track map but the data set I need to shift. I have just played with the method you mention which has offset the track map itself but not the data.
http://members.dodo.com.au/~wm1145/RT_overlays.pdf
If the image works, you can see the difference between the red and black traces (increasing shift in the X axis), that I would like to be able to 'correct' even if only on a corner by corner basis.
Thanks
Bill
http://members.dodo.com.au/~wm1145/RT_overlays.pdf
If the image works, you can see the difference between the red and black traces (increasing shift in the X axis), that I would like to be able to 'correct' even if only on a corner by corner basis.
Thanks
Bill
A) make sure your x axis is distance
B) you can trim time off the front end of the leading data in Run Manager
B) you can trim time off the front end of the leading data in Run Manager
Jeremy Lucas
Fast Tech Limited - a Race Technology Dealer
Fast Tech Limited - a Race Technology Dealer
Return to “General software support”
Who is online
Users browsing this forum: No registered users and 92 guests