Hi
Apologies in advance for the numpty question!
With a DL1 and a Video4 set up, to get auto start for both data and video, do both units need to be set to auto start, or will just having auto start on the Video4 "trigger" the DL1?
Many thanks
Will Stephens
Auto start - DL1 + Video4
The data from the DL1 is all recorded on the VIDEO4, so you only need to set the autostart on that. The DL1 won't be logging any data at all itself, but all data transmitted from the serial port on the DL1 will appear on the VIDEO4.
Martin
Martin
______________________________
Posted by Race Technology Support
Posted by Race Technology Support
Video 4 + DL1 + Dash 3
I have a problem getting the Video4 pro to work together with the DL1
- the V4 does not auto start, it only registrates after pushing the start/stop button
- there is no synchronisation between video and sensor data
- sensor data including GPS work all right.
Can anyone help me?
Thank you
Henny
- the V4 does not auto start, it only registrates after pushing the start/stop button
- there is no synchronisation between video and sensor data
- sensor data including GPS work all right.
Can anyone help me?
Thank you
Henny
Video 4 + DL1 + Dash 3
I have a problem getting the Video4 pro to work together with the DL1
- the V4 does not auto start, it only registrates after pushing the start/stop button
- there is no synchronisation between video and sensor data
- sensor data including GPS work all right.
Can anyone help me?
Thank you
Henny
- the V4 does not auto start, it only registrates after pushing the start/stop button
- there is no synchronisation between video and sensor data
- sensor data including GPS work all right.
Can anyone help me?
Thank you
Henny
Return to “General software support”
Who is online
Users browsing this forum: No registered users and 1 guest