DTA E48 with DASH 2
Posted: Tue Mar 01, 2016 2:55 pm
Hi has anyone managed to get the dash 2 working with the DTA E48. i have set up the data stream as per the RT guide and connected the dash 2 to the ECU correctly as per the instructions but it does not seem to output any of the ECU channels. i am specifically looking for water temp so i set it up using V8.5 of the software and selected the correct ECU channel from the drop down. am i missing something out as both ECU and dash 2 are being powered correctly and both work fine independently so i thought it would be a simple case of connecting them together once everything had been set up. i am getting all the correct voltages and all the serial cables have good continuity. any help would be appreciated.