Dash 2 / DL1 Sport Omex ECU Interface
Posted: Sun Mar 18, 2018 8:39 pm
Hello, Im trying (& failing!) to get my Dash 2 and DL1 Sport to read from my Omex 600 ECU
Im using the interface cable. connected up as per diagrams. The ECU Telemetry is set as it should be
Dash 2 is all set-up to for Omex using latest configuration software
Both devises have been re=flashed and are on current firmware
i Know the DL1 & Dash are communicating as the analogue inputs I've set up all work fine
i read on one of the knowledge base articles that i need to set the DL1 to decode the serial outputs. That's where i get stuck, as there doesn't seem to be any option to do this on the DL1 Sport configuration software
Am i missing something? Any help appreachiated
Many thanks Mark
Im using the interface cable. connected up as per diagrams. The ECU Telemetry is set as it should be
Dash 2 is all set-up to for Omex using latest configuration software
Both devises have been re=flashed and are on current firmware
i Know the DL1 & Dash are communicating as the analogue inputs I've set up all work fine
i read on one of the knowledge base articles that i need to set the DL1 to decode the serial outputs. That's where i get stuck, as there doesn't seem to be any option to do this on the DL1 Sport configuration software
Am i missing something? Any help appreachiated
Many thanks Mark