Hi,
Looked everywhere in the KB, software etc and can't find any repositories of CAN profiles. Was hoping to find a file in the software that I could work from.
Looking for a CAN profile to receive the MBE 9A4 data stream setup as per the link
https://www.race-technology.com/wiki/in ... dMBE992CAN
Many thanks in advance.
MBE 9A4 to Dash2pro CAN profile
Re: MBE 9A4 to Dash2pro CAN profile
Hello,
When a customer purchases a CAN receive license for a DASH2PRO, we send them a .CAN file & installation instructions via email. The .CAN file includes all of the CAN information the customer requires i.e. CAN IDs, CAN ID length, CAN baud rate, byte ordering, scale, offset etc. The customer then simply follows the installation instructions to load the .CAN file into the DASH2PRO configuration.
Support(D)
When a customer purchases a CAN receive license for a DASH2PRO, we send them a .CAN file & installation instructions via email. The .CAN file includes all of the CAN information the customer requires i.e. CAN IDs, CAN ID length, CAN baud rate, byte ordering, scale, offset etc. The customer then simply follows the installation instructions to load the .CAN file into the DASH2PRO configuration.
Support(D)
______________________________
Posted by Race Technology Support
Posted by Race Technology Support
Return to “General software support”
Who is online
Users browsing this forum: No registered users and 8 guests