I recently had to format my computer and lost all of my sensor data and formulas for the dash.
My dl1 and dash 3 are both still in the car. Is there any way of reading the information? it has taken me ages to get it the way I have it now.
reading config from dash/dl1
Support
Hello,
The DASH3 does has the feature to read back the configuration.
... but you do need to connect it directly to the PC.
You will need a lead that connects 12v to the DASH but not the PC. You can purchase one from our website. Follow the link below and select the available add on at the bottom.
http://www.race-technology.com/dash3_2_32.html
Kind regards,
Support
The DASH3 does has the feature to read back the configuration.
... but you do need to connect it directly to the PC.
You will need a lead that connects 12v to the DASH but not the PC. You can purchase one from our website. Follow the link below and select the available add on at the bottom.
http://www.race-technology.com/dash3_2_32.html
Kind regards,
Support
______________________________
Posted by Race Technology Support
Posted by Race Technology Support
Return to “General support questions”
Who is online
Users browsing this forum: No registered users and 48 guests