Firmware for DL-1 (MK1) and Dash 1

Klaus · Postby **Klaus** » Wed Dec 26, 2007 9:20 pm

Hello Support!

Can you please send me the *.hex-files to upgrade DL-1 and Dash 1?

We have two systems running. The first ist from a friend and has firmware 4-2. It don`t work with his Dash 1, witch he bougt later.

My System runs with Firmware 7-4 and Dash 1, but there is a small problem with the Voltage shown on the Dash 1:

When I switch on the DL-1 with connected Dash, the Voltage is something like 480 V.

But when I disconnect the Dash from running Logger and re-connect ist, the right Voltage is shown. :shock:

Greets from Germany

Klaus

Postby **RTUSA** » Fri Dec 28, 2007 3:45 pm

Klaus:

Firmware sent.

Your DL1 may need a reflash too, though the issue may be just the DASH1.

If your DL1 is a MK2 version (double row rear connector block and serial port on rear) you will need different firmware for that if a reflash is required.

Klaus · Postby **Klaus** » Sun Dec 30, 2007 2:50 pm

Hello Al

IÂ´m sorry, but there was no e-mail from you. :cry:

Maybe you can mail the *.hex-files again to "info@klaus-hormes.de".

Both DL-1 are MK1, so there is no special *.hex-file needed.

Thank you!

Klaus Hormes

Klaus · Postby **Klaus** » Wed Jan 02, 2008 9:10 pm

Hello Al

Got them!
Thanks!

Klaus