Need the latest firmware emailed to me at djb _@_ donniebarnes.com. Mine is an MK1 (serial port on front).
--Donnie
DL-1 Firmware
-
- Posts: 33
- Joined: Thu Oct 26, 2006 9:18 pm
- Location: Sydney, Australia
- Contact:
Me too :)
Hi,
I would also appreciate a copy of the latest firmware for a MK 1 DL1, with serial on front, and twin plugs up back. Currently still on ver. 7.?
Might as well go with the times...
Thanks, Stephen mtce at ozemail dot com dot au
I would also appreciate a copy of the latest firmware for a MK 1 DL1, with serial on front, and twin plugs up back. Currently still on ver. 7.?
Might as well go with the times...
Thanks, Stephen mtce at ozemail dot com dot au
Stephen Hooker
Sydney, Australia
Sydney, Australia
Emails sent.
(BTW, why is the dealer you bought them from not supporting you?)
(BTW, why is the dealer you bought them from not supporting you?)
Jeremy Lucas
Fast Tech Limited - a Race Technology Dealer
Fast Tech Limited - a Race Technology Dealer
Thanks for the email.
I purchased my DL1 directly from Race Technology in the UK and assumed the best way to get a firmware update was via a request in this forum.
If this is not correct, I am happy to be advised otherwise.
It would be so much less overhead if firmware updates were available online (with suitable warnings/descriptions for hardware variations).
Alan
I purchased my DL1 directly from Race Technology in the UK and assumed the best way to get a firmware update was via a request in this forum.
If this is not correct, I am happy to be advised otherwise.
It would be so much less overhead if firmware updates were available online (with suitable warnings/descriptions for hardware variations).
Alan
abooker wrote:It would be so much less overhead if firmware updates were available online (with suitable warnings/descriptions for hardware variations).
I agree, please try to convince RT.
(I'm just an independant dealer.)
Jeremy Lucas
Fast Tech Limited - a Race Technology Dealer
Fast Tech Limited - a Race Technology Dealer
-
- Posts: 22
- Joined: Sun Nov 25, 2007 6:48 pm
- Location: Flitwick, Bedfordshire
Return to “General support questions”
Who is online
Users browsing this forum: No registered users and 25 guests