I can't seem to find it.
Thanks
JAson
Where to get latest firmware?
It used to be in the "Support" part of the website but this area has been offline for the last week or so. Try email support@race-technology.com for it, they will probably be able to send you it directly.
You can download it from here:
http://www.race-technology.com/Firmware/DL1/DL1V6.zip
Regards,
Martin
http://www.race-technology.com/Firmware/DL1/DL1V6.zip
Regards,
Martin
______________________________
Posted by Race Technology Support
Posted by Race Technology Support
Links have changed
I want to update my DL1 firmware and can't find it among the new website content. Any hints?
Thanks
Kirk
Greensboro, NC USA
Thanks
Kirk
Greensboro, NC USA
Hi Greg:
Definitely secret handshake.
Newer (single rear plug) and older (dual rear plugs) DL1s are incompatible firmware-wise, and our firmware + installer currently can't discriminate. So for this and another couple of reasons we are currently doing email only to help keep a handle on it.
Firmware emailed.
Al
Definitely secret handshake.
Newer (single rear plug) and older (dual rear plugs) DL1s are incompatible firmware-wise, and our firmware + installer currently can't discriminate. So for this and another couple of reasons we are currently doing email only to help keep a handle on it.
Firmware emailed.
Al
Al Seim
Race Technology USA
Race Technology USA
-
- Posts: 18
- Joined: Thu Nov 16, 2006 4:19 pm
Hi Al,
could you do me a favour and send me the latest firmware for oldstyle DL1 and Dash2
Supermono55@xs4all.nl
Thanks,
Erik
could you do me a favour and send me the latest firmware for oldstyle DL1 and Dash2
Supermono55@xs4all.nl
Thanks,
Erik
Need a copy of the latest firmware for DL1
Gentlemen,
I would like to obtain a copy of the latest firmware for my DL-1.
My DL-1 was originally purchased on 04/06/2005 from D2 Engineering. It is equipped with two plug in ports on the back side and a single DB-25 connector on the front.
Thank you,
Jim Criner
Anchorage, Alaska
I would like to obtain a copy of the latest firmware for my DL-1.
My DL-1 was originally purchased on 04/06/2005 from D2 Engineering. It is equipped with two plug in ports on the back side and a single DB-25 connector on the front.
Thank you,
Jim Criner
Anchorage, Alaska
Re: Need a copy of the latest firmware for DL1
Gentlemen,
Forgot to include my Email address it is: jcriner@gci.net.
Thanks!
Jim Criner
Forgot to include my Email address it is: jcriner@gci.net.
Thanks!
Jim Criner
jcriner wrote:Gentlemen,
I would like to obtain a copy of the latest firmware for my DL-1.
My DL-1 was originally purchased on 04/06/2005 from D2 Engineering. It is equipped with two plug in ports on the back side and a single DB-25 connector on the front.
Thank you,
Jim Criner
Anchorage, Alaska
Jim Criner
-
- Posts: 18
- Joined: Thu Nov 16, 2006 4:19 pm
Please do not do that. There are several firmware versions that are specific the generation of DL1 you have. If you post that, inveritably someone is going to try to put it on the wrong one.
Jeremy Lucas
Fast Tech Limited - a Race Technology Dealer
Fast Tech Limited - a Race Technology Dealer
-
- Posts: 18
- Joined: Thu Nov 16, 2006 4:19 pm
Hi Jeremy,
OK i will erase it again (just got it working).
But please make a foolproof way to download firmware from the official website then.
Last outing i was having trouble with the DL1 in a windmill park at Eemshaven track. I did manage to get an internet connection, which didnt help anything since there was no firmware to download!
Bad service with both a logging system and dash out. It probably did cost me an engine, since i was training without a rev conter and a valve broke! (from hitting the rev limiter too much)
Erik P
OK i will erase it again (just got it working).
But please make a foolproof way to download firmware from the official website then.
Last outing i was having trouble with the DL1 in a windmill park at Eemshaven track. I did manage to get an internet connection, which didnt help anything since there was no firmware to download!
Bad service with both a logging system and dash out. It probably did cost me an engine, since i was training without a rev conter and a valve broke! (from hitting the rev limiter too much)
Erik P
Return to “General support questions”
Who is online
Users browsing this forum: Google [Bot] and 10 guests