Can the DL1 count a pulse signal (knock)?
Posted: Mon Oct 06, 2008 10:24 pm
I would like to use the DL1 to monitor if my car is knocking; my knock signal is a very quick pulse from the ECU (probably 5V). I see that Version 7 seems to have a "Pulse Counting" feature on the frequency inputs. Does the software then just count pulses and store that count in the variable VAR_0316 "Pulse 1 [-]" ? If so, I assume I can send that to the Dash display.
Thanks for any help!
Thanks for any help!