Run details show "Logging stopped for reasons unknown&q
Posted: Mon Feb 01, 2010 12:01 pm
Dear RT,
I have recently started using a DL1 + Dash3. Currently running it from the supplied 230V mains adapter, busy setting up. After programming the 'S' button on the Dash 3 to start & stop logging, and using it to check the operation, I had a look at the .RUN file in the RT analysis sw.
In the Run Details it states "... Logging stopped for reasons unknown, possibly loss of power. Logging stopped by source 54. "
I've also started and stopped logging using the button on the DL1. The Run Details then change to "... Logging stopped for reasons unknown, possibly loss of power. Logging stopped by source 17. "
I am puzzled. And worried a bit too. I would not like to find out after a training sessions or race that no data has been recorded, so:
Does anyone know why the logger does not recognize the 'stop' command from the Dash3 or the DL1 ?
with regards,
Alex Schoots
I have recently started using a DL1 + Dash3. Currently running it from the supplied 230V mains adapter, busy setting up. After programming the 'S' button on the Dash 3 to start & stop logging, and using it to check the operation, I had a look at the .RUN file in the RT analysis sw.
In the Run Details it states "... Logging stopped for reasons unknown, possibly loss of power. Logging stopped by source 54. "
I've also started and stopped logging using the button on the DL1. The Run Details then change to "... Logging stopped for reasons unknown, possibly loss of power. Logging stopped by source 17. "
I am puzzled. And worried a bit too. I would not like to find out after a training sessions or race that no data has been recorded, so:
Does anyone know why the logger does not recognize the 'stop' command from the Dash3 or the DL1 ?
with regards,
Alex Schoots