Low contrast on Dash1 after V7 firmware reflash?

[spaf]

I just reflashed the firmware on my DL1 to V7 and now the contrast on the Dash1 is very low... Is this possibly an issue with the firmware or something seperate?

The Dash1 still appears to work fine, it is just very hard to read...

Thanks

[RTUSA]

That is a separate issue.

First thing to check is supply voltage, the DASH1 contrast will fade out at a voltage which will still operate (barely) the DL1. One way to check voltage is with the DL1 - analog channel 8 monitors the voltage. If you are at 10+ you should be OK.

If the supply voltage is OK you probably have a hardware fault, contact Support or your local dealer.

[spaf]

Thanks... I believe the voltage was the problem as it seems to have fixed itself.