Is it possibele to switch the view of the data analysis software from mph to kmh?
And how?
Thanks a lot Thomas
KMH Display
Data (second from the top left)-> Variable Manager -> expand the Standard variable list -> expand the speed list -> click on units
You might as well change the power one too (to HP) while your in the variable manager.
Then most important, click the "apply" button down on the bottom right of the window. It's easy to miss if you have have a large monitor.
If you want to save that file off for different frequently used variable setups or to have a variable setup to give to another user:
File -> Advanced Load/Saves -> Save Variable Information to save a *.var file.
And you can recall it with File -> Advanced Load/Saves ->Load Variable Information anytime.
You might as well change the power one too (to HP) while your in the variable manager.
Then most important, click the "apply" button down on the bottom right of the window. It's easy to miss if you have have a large monitor.
If you want to save that file off for different frequently used variable setups or to have a variable setup to give to another user:
File -> Advanced Load/Saves -> Save Variable Information to save a *.var file.
And you can recall it with File -> Advanced Load/Saves ->Load Variable Information anytime.
Jeremy Lucas
Fast Tech Limited - a Race Technology Dealer
Fast Tech Limited - a Race Technology Dealer
Return to “General support questions”
Who is online
Users browsing this forum: Bing [Bot] and 29 guests