I see that there is an option in the setup to use the shift lights as a performance indicator, but in the setup it states that the lights indicate time slip. I have an older DL1 so I don't think that option is compatible.
How can I replicate this using sector deltas? I would like all green lights if the sector is faster than prior best, red lights if slower.
Thanks.
Dash 4 - Sector performance indicator setup
Try this:
1) Configuration->Shift Lights
2) Right tab
3) Uncheck "match the left" if checked
4) Check "Advanced"
5) Check "To display a barchart..."
6) Set variable to "Best sector delta"
7) No LEDs set to 0
All green LEDs = -0.01 (or if you wantto have a variable number of lights depending on the delta, try something like -0.6, which would be one LED per 10th)
Good luck, and good idea, frankly the performance indicator doesn't seem to work with the MkIII either as far as I can tell...
-Chris
1) Configuration->Shift Lights
2) Right tab
3) Uncheck "match the left" if checked
4) Check "Advanced"
5) Check "To display a barchart..."
6) Set variable to "Best sector delta"
7) No LEDs set to 0
All green LEDs = -0.01 (or if you wantto have a variable number of lights depending on the delta, try something like -0.6, which would be one LED per 10th)
Good luck, and good idea, frankly the performance indicator doesn't seem to work with the MkIII either as far as I can tell...
-Chris
Return to “General support questions”
Who is online
Users browsing this forum: Bing [Bot] and 255 guests