Page 1 of 1

Dash 4 - Sector performance indicator setup

Posted: Thu May 31, 2012 2:42 pm
by Bikey
I see that there is an option in the setup to use the shift lights as a performance indicator, but in the setup it states that the lights indicate time slip. I have an older DL1 so I don't think that option is compatible.

How can I replicate this using sector deltas? I would like all green lights if the sector is faster than prior best, red lights if slower.

Thanks.

Posted: Fri Jun 01, 2012 2:29 am
by evl
Try this:

1) Configuration->Shift Lights
2) Right tab
3) Uncheck "match the left" if checked
4) Check "Advanced"
5) Check "To display a barchart..."
6) Set variable to "Best sector delta"
7) No LEDs set to 0
8) All green LEDs = -0.01 (or if you wantto have a variable number of lights depending on the delta, try something like -0.6, which would be one LED per 10th)

Good luck, and good idea, frankly the performance indicator doesn't seem to work with the MkIII either as far as I can tell...

-Chris

Posted: Fri Jun 01, 2012 1:16 pm
by Bikey
Thanks, I will give it a shot.