The cable that goes from my DL1 to the quick connect cable on the Dash4 Pro has broken. The cable got kinked and the wires broke free from the connector. I opened it up to redo the connections, but can't tell which wire goes to which connector. The colors are red, green and yellow. The black wire is still connected. I tried opening the end on the Dash side, but the wires are Red, Red, White, White. I'm leaving in a couple of days for the SCCA Runoffs and need to fix this before I can leave. Can I get the pin out for the wires?
DL1 to Dash4 Pro Cable Pin Out
Return to “General support questions”
Who is online
Users browsing this forum: No registered users and 20 guests