Unsuccessful first outing. Help please.
Posted: Tue Aug 04, 2015 8:09 pm
Hi all. I bought a DL1 Mk2 and Dash 3 from a friend of mine and fitted it to my car. GPS sensor is on the roof. All powers up fine and the dash displays the GPS speed. I have however had an issue getting it to log. I was at Brands Hatch last weekend, I inserted a card which had a configuration file I had created. The logging light on the DL1 was permanently on and wouldn't turn off if I pushed the start/stop button. After the day I checked the card and there was no data recorded.
My questions:
1.) How do I 'install' the config file as obviously putting it on the card and inserting it doesn't do the trick.
2.) How do I get the DL1 to learn a new circuit and thus set the markers so I can get the lap times displayed on the Dash 3?
Many thanks.
My questions:
1.) How do I 'install' the config file as obviously putting it on the card and inserting it doesn't do the trick.
2.) How do I get the DL1 to learn a new circuit and thus set the markers so I can get the lap times displayed on the Dash 3?
Many thanks.