Incorrect value in Dash 3?
Posted: Tue Apr 05, 2016 10:06 am
Please a litle help.
Active pressure sensor 0-72 PSI / 0.5-4.5 output.
DL1 formula = "(18.1 * x) - 9.06"
The pressure values in Monitor and Monitor Lite are correctly.
The value in Dash3 display shows ten times higher value.
What's wrong?
André
Active pressure sensor 0-72 PSI / 0.5-4.5 output.
DL1 formula = "(18.1 * x) - 9.06"
The pressure values in Monitor and Monitor Lite are correctly.
The value in Dash3 display shows ten times higher value.
What's wrong?
André