Displaying Gear from ECU
Posted: Thu May 05, 2016 9:04 am
I'm trying to display the gear on mt DASH4PRO from my Specialist components Tornado ECU.
I can see that there is a 'Gear (current gear)' in the standard variables, this is set up from the gear menu, using speed and rpm. I have set this up, but it doesn't work because there is no speed input from the ECU. To be clear the ECU has a wheel speed input, but it is clearly not getting to the dash.
The information here https://www.race-technology.com/wiki/in ... AndTyphoon would suggest that the gear input is VAR_1024, but this doesn't work either. Again, to be clear, the ECU uses wheel speed and rpm to calculate the gear, and this all works.
I've spoken to Specialist components and they have told me that the gear CAN output is ID 0x306 byte 0, can this output be configured to display on my dash?
Thanks
I can see that there is a 'Gear (current gear)' in the standard variables, this is set up from the gear menu, using speed and rpm. I have set this up, but it doesn't work because there is no speed input from the ECU. To be clear the ECU has a wheel speed input, but it is clearly not getting to the dash.
The information here https://www.race-technology.com/wiki/in ... AndTyphoon would suggest that the gear input is VAR_1024, but this doesn't work either. Again, to be clear, the ECU uses wheel speed and rpm to calculate the gear, and this all works.
I've spoken to Specialist components and they have told me that the gear CAN output is ID 0x306 byte 0, can this output be configured to display on my dash?
Thanks