video4 recording / logging flag

Rich52
Posts: 13
Joined: Fri Dec 12, 2014 3:57 pm

video4 recording / logging flag

Postby Rich52 » Sun Jul 10, 2016 9:46 am

Is there a variable or other way that indicates recording in progress that can be used to control overlay controls? I see a "Logging status" variable in video4 that seems to be always zero.

If not it would be a useful feature - I'm wanting to show a large speed/rpm display to use in a setup mode while not recording.

Support (D)
Posts: 74
Joined: Mon Aug 17, 2015 9:36 am

Re: video4 recording / logging flag

Postby Support (D) » Mon Jul 11, 2016 12:46 pm

Hello there,

So the only way to see the overlay of the VIDEO4 without logging data would be to connect a monitor of some sort to the 'video out' connector on the unit.

When you say: "Is there a variable or other way that indicates recording in progress that can be used to control overlay controls?" , do you want to see for example - if the unit is logging based on a value that appears on the overlay control you have set on the VIDEO4?

I mean the logging LED on the front of the VIDEO4 will indicate this, however if you have it sealed away or behind the dash then I can understand in that situation the need to see this.

Am I on the mark or do you mean somethng different?

Kind regards,
Support (D)


Return to “General support questions”

Who is online

Users browsing this forum: No registered users and 36 guests