Dumb Lap marker / sector question

rbahr
Posts: 19
Joined: Sun Aug 10, 2008 12:08 am
Location: Boston

Dumb Lap marker / sector question

Postby rbahr » Wed Aug 02, 2017 4:42 pm

Hi All,

I load up a .run file and the Analysis tool loads it, automatically creates a lap marker and then a large number of sector markers. These are numbered something like M2, M2.1, M2.2, M3,... and there seem to be many. In addition, I do not see a reasonable number of sector columns

I would have expected to see a set of markers that apply to all laps and I can evaluate the laps easily.

What am I doing wrong?

Thanks

Ray

Support (D)
Posts: 74
Joined: Mon Aug 17, 2015 9:36 am

Re: Dumb Lap marker / sector question

Postby Support (D) » Thu Aug 03, 2017 8:47 am

Dear Ray,

It appears the analysis software is automatically set to load a lap marker onto the track map. Additionally, the software seems to be set to add sector markers automatically too.

On the software if you click on the 'Data' tab at the top of the screen and select 'Clear all track markers' this will get rid of the markers placed automatically. From there you can add the markers manually i.e. put them where you want on the track map and more importantly choose the amount of markers you have.

Best regards,
Support(D)


Return to “General support questions”

Who is online

Users browsing this forum: No registered users and 37 guests