I have a DL1 Pro with the 1KHz ANA Upgrade. The unit configuration file is set to record 3 analog channels at 1KHz but I get 100Hz samples repeated 10 times. The RUN file shows 1ms data intervals but each 100Hz sample is simply repeated 10 times. Is this what the 1KHz samples means?? Not really an upgrade??
Thanks,
Jeff
DL1 Pro Not recording at 1KHz
-
- Posts: 8
- Joined: Fri Nov 06, 2015 6:01 pm
- Location: Vancouver Canada
Re: DL1 Pro Not recording at 1KHz
Hi Jeff,
Many thanks for your post.
1KHz logging should indeed be 1KHz, would it be possible that you could send me the run file of the data you're seeing the issue in, the configuration file running on the DL1 and could you also tell me the main application version running on the DL1 please.
Please send the above files to my email
sam@race-technology.com
I'll look into these as soon as I receive them.
Kind Regards,
RT Support (SK)
Many thanks for your post.
1KHz logging should indeed be 1KHz, would it be possible that you could send me the run file of the data you're seeing the issue in, the configuration file running on the DL1 and could you also tell me the main application version running on the DL1 please.
Please send the above files to my email
sam@race-technology.com
I'll look into these as soon as I receive them.
Kind Regards,
RT Support (SK)
______________________________
Posted by Race Technology Support
Posted by Race Technology Support
Return to “General support questions”
Who is online
Users browsing this forum: Bing [Bot] and 50 guests