Hi, had my dash2, video 4 and DL1 for years and its been great but since I reflashed my dash2 to utilise the new software my water temp has been bouncing about all over. When I first turn the dash on it reads correctly, then slowly drops down to 0, then climbs again to the correct temperature and drops back to 0. In the live monitor it is steady at the correct temperature, as it is in the ECU software. I have a CAN converter connected to a DTA S80. All my other temperature and pressure readings are correct and stable.
Other annoyances, can I turn off the Odometer at all now, or use it for something else? I don't need it and it just clutters up the display.
My GPS keeps saying I'm doing 427mph briefly so my odometer thinks I've done nearly 300 miles tonight....
Please can you shed some light on this for me?
Thanks for your help.
Water temp erratic
Re: Water temp erratic
Can you check what filtering you have set up on the water temperature channel? Would you be able to sample a section of the data using Live Monitor and send it over along with your DASH2 configuration so I could run the test here with your setup?
A couple of people have asked for the odometer to be switchable, it will be in the next firmware update for the DASH2.
email directly to me, mhill at race-technology dot com
Martin
A couple of people have asked for the odometer to be switchable, it will be in the next firmware update for the DASH2.
email directly to me, mhill at race-technology dot com
Martin
-
- Posts: 10
- Joined: Thu Apr 15, 2010 7:40 am
Re: Water temp erratic
Thanks for the reply, engines had a few other issues on the dyno so i'll not be doing anything with it for few weeks, but will get in touch when I am. Thanks again.
Return to “General support questions”
Who is online
Users browsing this forum: No registered users and 303 guests