CAN interface, change of ecu

molecular bob
Posts: 2
Joined: Fri May 22, 2015 2:00 pm

CAN interface, change of ecu

Postby molecular bob » Thu Oct 04, 2018 1:03 pm

I have a used CAN interface that i wish to use With a DTA s60 ecu, it was originally used with a MOTEC, can I reprogram this myself or is it a return to base job? If I can do this myself what software is required, the car came with no discs for the CAN, but does have the DASH 2 disc, will I find the required software there?

Thanks

Ian B.
Ian B

Support
Posts: 399
Joined: Mon Nov 21, 2005 4:09 pm

Re: CAN interface, change of ecu

Postby Support » Thu Oct 04, 2018 1:17 pm

Hello,

It is a "return to base job" unfortunately, as we'll need to reprogram the CAN Adaptor for your new ECU (DTA S60 ECU). Please email us at the following address to arrange return of your CAN Adaptor for reprogramming: service (at) race - technology (dot) com.

Additionally, you'll find the latest Race Technology software here - http://www.race-technology.com/gb/racin ... -downloads.

Support(D)
______________________________
Posted by Race Technology Support


Return to “General support questions”

Who is online

Users browsing this forum: No registered users and 38 guests