CAN interface, change of ecu
Posted: Thu Oct 04, 2018 1:03 pm
by molecular bob
I have a used CAN interface that i wish to use With a DTA s60 ecu, it was originally used with a MOTEC, can I reprogram this myself or is it a return to base job? If I can do this myself what software is required, the car came with no discs for the CAN, but does have the DASH 2 disc, will I find the required software there?
Thanks
Ian B.
Re: CAN interface, change of ecu
Posted: Thu Oct 04, 2018 1:17 pm
by Support
Hello,
It is a "return to base job" unfortunately, as we'll need to reprogram the CAN Adaptor for your new ECU (DTA S60 ECU). Please email us at the following address to arrange return of your CAN Adaptor for reprogramming: service (at) race - technology (dot) com.
Additionally, you'll find the latest Race Technology software here - http://www.race-technology.com/gb/racin ... -downloads.
Support(D)