RTLive: Reset "Integrate" Function
Posted: Sun Apr 28, 2019 6:10 pm
Hi,
I would like to know if there is a way to reset a can channel that I integrate. I would like to zero the number without stopping the log or shutting down the logger (RTLIVE). It shall be a push button. As a first step I would accept to reset all integration values with the same operation.
If there is a way to either use the trigger button (or external input), CAN command or even a serial command, please let me know. Otherwise I would appreciate if you tell me whether you consider such function for future firmware...
regards
I would like to know if there is a way to reset a can channel that I integrate. I would like to zero the number without stopping the log or shutting down the logger (RTLIVE). It shall be a push button. As a first step I would accept to reset all integration values with the same operation.
If there is a way to either use the trigger button (or external input), CAN command or even a serial command, please let me know. Otherwise I would appreciate if you tell me whether you consider such function for future firmware...
regards